Publications related to High-intensity discharge lamp

DEMO toroidal field coil fast discharge unit integration studies

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

Dynamic pulse scheduling in ASDEX Upgrade: Disruption avoidance and investigation of the H-Mode density limit

Federico Alberto Alfredo Felici, Alessandro Pau, Bernhard Sieglin

Operation of a tokamak device requires the coordinated operation of a multitude of systems. The sequence of operations during a discharge is both too complex and fast for human interaction. A common way of operation is a predefined sequence of operations w ...

2023

Breakdown development in a nanosecond pulsed dielectric barrier discharge in humid air in plane-to-plane geometry

Ivo Furno, Xin Yang, Lorenzo Ibba

We used the ns electric field induced second harmonic (EFISH) generation diagnostic to measure the electric field evolution in a 200 ns pulse, dielectric barrier, plane-to-plane discharge in humid air, on the time scale shorter than the laser pulse duratio ...

Iop Publishing Ltd2023

Wideband integrated bioaerosol sensor (WIBS) excited, fluorescent, and hyper-fluorescent particle number concentrations and normalized size distributions (dN/dlogDp) measured in the Swiss container during MOSAiC 2019/2020

Julia Schmale, Ivo Fabio Beck, Alireza Moallemi, Margarida Teles Nogueira Rolo

These datasets contain the total particle number concentrations and normalized size distributions (dN/dlogDp) of excited, fluorescent, and hyper-fluorescent particles of sizes 0.5 to 20 μm (optical diameter). The normalized size distribution datasets are s ...

Zenodo2023

Characterisation of electron cyclotron wall conditioning plasma in ASDEX Upgrade

Richard Pitts

Electron cyclotron wall condition (ECWC) discharges are characterised in ASDEX Upgrade with full tungsten plasma facing components and X2 polarised waves launched from the equatorial ports, relevant to ECWC conditions in ITER Pre-Fusion Power Operation pha ...

IOP Publishing Ltd2023

Photochemical Alkynylations with Hypervalent Iodine Reagents

Stephanie Grace Elizabeth Amos

Over the past twenty years, photochemical transformations have gained in importance in organic chemistry. Indeed, the development of photocatalysts has allowed the use of visible light as an energy source for chemical transformations. More specifically, ph ...

EPFL2022

Separation and Recycling Potential of Rare Earth Elements from Energy Systems: Feed and Economic Viability Review

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil, Viktoria Paetzel

This review explores the potential of separating and recycling rare earth elements (REEs) from different energy conversion systems, such as wind turbines, electric vehicles batteries, or lighting devices. The REEs include 17 elements (with global productio ...

2022

Alertness in work environments : on the role of indoor daylight exposure

Victoria Eugenia Soto Magán

Light enables to see the world around us, while playing a key role in our biological functioning. During the last decades, light has become an important research topic for chronobiologists and neuroscientists, and their findings are increasingly interwoven ...

EPFL2021

Parametric study of the TF coil design for the European DEMO

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

In addition to a reduced number of feeders, which would simplify their integration in the cryostat of the tokamak, the present study considers the possibility to reduce the voltage during safety discharge of the toroidal field (TF) coils. A lowered dischar ...

2021

Estimating Nonplanar Flow from 2D Motion-blurred Widefield Microscopy Images via Deep Learning

Michael Stefan Daniel Liebling, Adrian Shajkofci

Optical flow is a method aimed at predicting the movement velocity of any pixel in the image and is used in medicine and biology to estimate flow of particles in organs or organelles. However, a precise optical flow measurement requires images taken at hig ...

IEEE2021

Validation of Spectral Simulation Tools for the Prediction of Indoor Electric Light Exposure

Marilyne Andersen, Clotilde Marie A Pierson, Myrta Gkaintatzi-Masouti

As the interest in design applications related to responses to light beyond vision is growing, two simulation tools, ALFA and Lark, have been developed to incorporate spectral characteristics of light in the evaluation of indoor lighting conditions. The sp ...

Commission Internationale de L'Eclairage2021

The Impact of Light Distribution and Furniture Layout on Meeting Light Exposure Objectives in an Office – A Simulation Case Study

Marilyne Andersen, Steffen Lutz Hartmeyer, Megan Nicole Danell, Siobhan Francois Rockcastle

The present simulation case study compares the impact of electric lighting distributions in relation to work-desk location and orientation on work-plane and eye-level illumination within a small private office. The aim of this study is to better understand ...

2021

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Evgeny Solodko

EDIPO 2 (the upgraded EDIPO test facility) will provide a unique testbed for superconducting cables for fusion magnets,accelerators, and other applications. Compared to the previous magnet assembly, the magnetic field is enhanced from 12.35 T to 15 T, the ...

IEEE Institute of Electrical and Electronics Engineers2021

Green processing and biotechnological potential of grape pomace: Current trends and opportunities for sustainable biorefinery

Edgard Gnansounou, Ranjna Sirohi

Grape pomace is a high quality biodegradable residue of the winery industry. It is comprised of grape seed, skin and stalks, and is blessed with substantial quantities of phenols, flavonoids and anthocyanins with high antioxidant potential. Currently, ther ...

Elsevier2020

Cold Atmospheric Plasma Inactivation of Microbial Spores Compared on Reference Surfaces and Powder Particles

Alan Howling, David Martinet

Heat-resistant spores on a dry, heat- and water-sensitive food matrix are difficult to inactivate. Radioactive or X-ray exposure is allowed and accepted only for some selected commodities. Non-thermal atmospheric pressure plasma treatments could offer an e ...

SPRINGER2020

Design and Control of a KE (Kinetic Energy) - Compensated Gravitational Energy Storage System

Alfred Rufer

A gravitational energy storage device is described where the kinetic energy to recover while braking a vertically moving mass is compensated by an auxiliary storage device based on supercapacitors. The characteristic power surge occurring by a fast decreas ...

IEEE2020

Species-species interactions modulate copper toxicity under different visible light conditions

Valérie Gagnaux

Combination of biotic and abiotic factors influences the effects of naturally occurring or anthropogenic chemicals on photosynthetic microorganisms in the aquatic environment. Nonetheless, the combined effects of physical stressors and species-species inte ...

ACADEMIC PRESS INC ELSEVIER SCIENCE2019

Electroluminescence of Single InGaN/GaN Micropyramids

Hua Zhang, Gwénolé Jean Jacopin

The results of the fabrication of technological regimes of formation and the study of the optical properties of light emitting diodes (LED) micropyramids based on InGaN/GaN are presented. The structures were formed by the method of Metalorganic vapour-phas ...

PLEIADES PUBLISHING INC2019

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019