Publications related to Lost-wax casting

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process

Josephine Anna Eleanor Hughes, Kai Christian Junge, Antonia Georgopoulou Papadonikolaki

When developing or designing biomimetic robotic fingers with rigid and soft components and integrated sensors, fabrication is often a bottle-neck when assembling and casting processing techniques are used. This study introduces a thermoplastic multi-materi ...

IEEE2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

Photocured Nanocellulose Composites: Recent Advances

Yves Leterrier, Aigoul Schreier, Mohammed Arif Poothanari, Julien Bras

This perspective gives an overview of recent progress in thefield of photocured polymer composites based on variousforms of nanocelluloses, with a focus on cellulose nanofibrils. The manufacturing processes and performances of these nanocellulosecomposites ...

AMER CHEMICAL SOC2022

Ultra-Compact Ka-band Metamaterial Waveguide Filters, Fabricated by Lost-Wax Casting

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper proposes a novel technique for the design of miniaturized Ka-band filters based on locally resonant metamaterials (LRMs), which are fabricated monolithically using lost wax casting. We implement ultra-small metamaterial filters by exploiting a n ...

IEEE2021

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Thermal Activation, Intermittency and Size Effects in the Plastic Deformation of Cast Aluminium Microwires

Suzanne Godelieve Alphonsine Verheyden

The microcasting process is a scaled-down investment casting process in which molten metal is pressure-infiltrated and directionally solidified in water-soluble moulds. It was previously developed to produce metallic microwires with a diameter (D) between ...

EPFL2018

Small-scale metal castings, small-scale metal/transparent composite structures and process to produce same

Andreas Mortensen, Yves Bellouard, Raphaël Charvet, Cyril Dénéréaz

The method comprises at least the following steps: - exposing a substrate to focused laser irradiation at a preselected series of locations that trace a subset of the substrate volume that is connected to the surface of the substrate; some subsets of subst ...

2017

Effect of fiber orientation on the in-plane tensile response of UHPFRC reinforcement layers

Eugen Brühwiler, Emmanuel Denarié, Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on site Ultra-High Performance Fiber Reinforced cement-based Composite UHPFRC) layers is a very efficient reinforcement technique, currently spreading. For the design of these tensile reinf ...

Elsevier2016

Controlling Mesopore Size and Processability of Transparent Enzyme-Loaded Silica Films for Biosensing Applications

Heinrich Hofmann, Bernard Wenger, Oswaldo Javier Pérez Anguiano, Raphaël Pugin, Emmanuel Scolan

Silica-based nanoporous thin films including large mesopores are relevant as enzyme supports for applications in biosensing. The diffusion and immobilization of large biomolecules such as enzymes in such porous films require the presence of large mesopores ...

Amer Chemical Soc2015

Structural Behavior of R-UHPFRC - RC Composite Slabs

Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on-site Ultra-High Performance Fiber Reinforced cement-based Composite (UHPFRC) layers is an efficient reinforcement technique, currently spreading. The thin layer of UHPFRC, with or withou ...

EPFL2015

Tuneable PTC effect in polymer-wax-carbon composite resistors

Peter Ryser, Thomas Maeder, Caroline Jacq, Ludivine Ammon

Purpose: The resistivity dependence on temperature of composite resistors made of carbon fillers dispersed in an organic matrix are known to be strongly affected by the matrix thermal expansion. High positive temperature coefficient (PTC) effects, i.e. ess ...

Emerald2014

Growth of Secondary Dendrite Arms of Fe C Alloy during Transient Directional Solidification by Phase-field Method

Jonathan Dantzig, Yu Xie

Due to the variations in the local solidification conditions in typical industrial casting processes, dendrites grow under transient rather than steady-state conditions. In this study, the phase-field method was used to study the evolution of secondary den ...

Iron Steel Inst Japan Keidanren Kaikan2014

Heterogeneous material micro-transfer by ink-jet print assisted mould filling

Jürgen Brugger, Grégoire Maxime Smolik, Victor Javier Cadarso Busto, Loïc Jacot-Descombes, Vaida Auzelyte

A novel combination of ink-jet printing (IJP) and micro-transfer moulding (μ-TM) for high-resolution, heterogeneous material microstructuring is demonstrated. First, IJP is used to accurately fill the micro-cavities in an elastomeric mould, thus avoiding t ...

Elsevier2012

Influence of SiC reinforcement particles on the tribocorrosion behaviour of Al-SiCp FGMs in 0.05M NaCl solution

Stefano Mischler

The main aim of this work was to study and understand the influence of SiC particles on the corrosion and tribocorrosion of Al-matrix composite materials. For that, Al-SiCp functionally graded composites were produced by centrifugal casting and different S ...

2011

As-Cast Residual Stresses in an Aluminum Alloy AA6063 Billet: Neutron Diffraction Measurements and Finite Element Modeling

Jean-Marie Drezet, André Phillion

The presence of thermally induced residual stresses, created during the industrial direct chill (DC) casting process of aluminum alloys, can cause both significant safety concerns and the formation of defects during downstream processing. Although numerica ...

2010

Fatigue design of cast steel nodes in tubular bridge structures

Alain Nussbaumer, Senta Haldimann

Due to their aesthetic and structural advantages, tubular space truss structures are enjoying increasing popularity in modern bridge construction. The use of cast steel nodes for the joints between the circular hollow section members is also becoming incre ...

Elsevier2008

Ultra-thick micro-optical components using the PRISM photosensitive flexopolymer

Martinus Gijs, Abdeljalil Sayah, Virendra Kumar Parashar, Venkataragavalu Sivagnanam

We present the photosensitive flexopolymer PRISM as a new promising material for the realization of thick optical components. The PRISM flexopolymer can be directly polymerized using conventional UV exposure and is simply developed in a water-based solutio ...

2007

Comportement structural des bétons de fibres ultra performants en traction dans des éléments composés

John Wuest

Ultra high performance concretes (UHPFRC) are characterized by a dense matrix and a high fibre content. These materials exhibit exceptional mechanical and durability properties making them an ideal material for rehabilitating existing structures. The prima ...

EPFL2007