Publications related to Titanium isopropoxide

TiO2- based ceramics, from basic science to applications

Nanomaterials and nanoparticles are nowadays used in a wide range of applications; from sunscreens, paint and food industry to catalytic processes, lighting, TV's and displays, their presence is percolating in our daily life. New applications rise every da ...

EPFL2020

Chemo-mechanical effects on the tribocorrosion behavior of titanium/ceramic dental implant pairs in artificial saliva

Anna Neus Igual Muñoz, Alejandro Roda Buch

In this paper, the degradation mechanisms of the ceramic and the metal in Titanium/Zirconia pairs for biomedical applications were analyzed. To do that, an experimental set-up with well-controlled mechanical and chemical conditions was used based on a unid ...

2019

Nonequilibrium exciton physics in hybrid lead-halide perovskites and anatase titanium dioxide

Tania Palmieri

The strength of the electron-hole interaction in bulk semiconductors is not only determined by the dielectric environment, but also depends on the presence of other quasiparticles - free charge carriers or phonons - that populate the system. In the former ...

EPFL2019

Spontaneous ecological recovery of vegetation in a red gypsum landfill: Betula pendula dominates after 10 years of inactivity

François Gillet

Red gypsum is the product of the neutralization of titanium dioxide (TiO2) extraction residue from ilmenite and anatase. The disposal of red gypsum creates heterogeneous plots with layers that may include Fe, Ca, Al, Mg, Mn, S, and other elements and an al ...

ELSEVIER SCIENCE BV2019

Donor Effect on the Photoinduced Interfacial Charge Transfer Dynamics of D−π–A Diketopyrrolopyrrole Dye Sensitizers Adsorbed on Titanium Dioxide

Jacques-Edouard Moser, Ulf Anders Hagfeldt, Heewon Bahng

In this report, we investigate the effects of a strong electron-donating group on the electron injection and recombination processes of diketopyrrolopyrrole (DPP)-sensitized TiO2 films by comparing the dynamics of triphenylamine donor-installed DPP_A and d ...

2018

Surface Kinetics of Titanium Isopropoxide in Chemical Vapor Deposition of Titanium Dioxide and Barium Titanate

Michael Oliver Reinke

All chemical vapor deposition (CVD) processes rely on the adsorption and decomposition of precursors on a substrate to deposit the desired material. The growth rate of the film is determined by the surface kinetics of the utilized precursor molecules and g ...

EPFL2016

Influence of TiO2 phase composition on the photocatalytic activity of TiO2/MWCNT composites prepared by combined sol-gel/hydrothermal method

László Forró, Arnaud Magrez, Endre Horvath, Klara Hernadi

Titanium dioxide/multiwall carbon nanotube (TiO2/MWCNT) composites were prepared by sol-gel method with hydrolysis of titanium alkoxide precursor followed by crystallization via hydrothermal treatment at different acid concentrations. Transmission electron ...

Elsevier Science Bv2016

Atomic Scale Observation of Chemical and Electronic Properties of Metal-Oxide Surfaces

Christian Alexander Stephan Dette

To meet the future global energy demand - an estimated additional 10 terawatts (TWs) per year in 2050 - a diversification of energy sources and fuels is needed. Solar energy represents a prominent alternative energy source. An important material for these ...

EPFL2016

Selective Growth of Titanium Dioxide by Low-Temperature Chemical Vapor Deposition

Patrik Willi Hoffmann, Yury Kuzminykh, Michael Oliver Reinke

A key factor in engineering integrated optical devices such as electro-optic switches or waveguides is the patterning of thin films into specific geometries. In particular for functional oxides, etching processes are usually developed to a much lower exten ...

Amer Chemical Soc2015

New evidence for hybrid acrylic/TiO2 films inducing bacterial inactivation under low intensity simulated sunlight

César Pulgarin, Juan Kiwi, Sami Rtimi

This study addresses the preparation and characterization of hybrid films prepared from Titanium dioxide (TiO2) Pickering stabilized acrylic polymeric dispersion as well as their bacterial inactivation efficiency under sunlight irradiation. Complete bacter ...

Elsevier2015

Significance of surface charge and shell material of superparamagnetic iron oxide nanoparticle (SPION) based core/shell nanoparticles on the composition of the protein corona

Heinrich Hofmann, Usawadee Sakulkhu, Lionel André Maurizi, Morteza Mahmoudi, Géraldine Sylvie Coullerez

As nanoparticles (NPs) are increasingly used in many applications their safety and efficient applications in nanomedicine have become concerns. Protein coronas on nanomaterials' surfaces can influence how the cell "recognizes" nanoparticles, as well as the ...

Royal Soc Chemistry2015

Reactivity enhancement of oxide skins in reversible Ti-doped NaAlH4

Andreas Züttel

The reversibility of hydrogen sorption in complex hydrides has only been shown unambiguously for NaAlH4 doped with transition metal compounds. Despite a multitude of investigations of the effect of the added catalyst on the hydrogen sorption kinetics of Na ...

Amer Inst Physics2014

Mapping of the Photoinduced Electron Traps in TiO2 by Picosecond X-ray Absorption Spectroscopy

Majed Chergui, Marco Eli Reinhard, Thomas James Penfold, Mercedes Hannelore Rittmann-Frank, Jochen Rittmann

Titanium dioxide (TiO2) is the most popular material for applications in solar-energy conversion and photocatalysis, both of which rely on the creation, transport, and trapping of charges (holes and electrons). The nature and lifetime of electron traps at ...

Wiley-Blackwell2014

Infiltrated Cu8Al-Ti alumina composites

Andreas Mortensen

The effect of titanium additions on the interface and mechanical properties of infiltrated Cu8 wt%Al-Al2O3 composites containing 57 +/- 2 vol% ceramic are investigated, exploring two different Al2O3 particle types and four different Ti concentrations (0, 0 ...

Elsevier2014

Resistive Programmable Through Silicon Vias for Reconfigurable 3D Fabrics

Giovanni De Micheli, Davide Sacchetto, Michail Zervas, Yusuf Leblebici, Yüksel Temiz

In this letter we report on the fabrication and characterization of titanium dioxide (TiO2)-based resistive RAM (ReRAM) co-integration with 380 ìm-height Cu Through Silicon Via (TSV) arrays for programmable 3D interconnects. Nonvolatile resistive switching ...

Institute of Electrical and Electronics Engineers2012

On the Applicability of Oil and Dye Technique During the Design Phase and Operation of Experimental Rigs

Alexandros Terzis

In this paper, an oil and dye flow visualization technique applied in two different cases of experimental testing is described, namely a single fan in crossflow and the wake of a compressor cascade. In both cases, the mixture of paint was prepared using a ...

2011

Electrophoretic deposition of multi-scale structured TiO2 surfaces

The long term fixation of biomedical implants constitutes an issue in the clinical praxis. Implant fixation can be improved by functionalizing its surface. In fact, the tissue response around an implant is conditioned by its surface morphological and chemi ...

EPFL2009

PZT thin film growth and chemical composition control on flat and novel three-dimensional micromachined structures for MEMS devices

Florian Calame

Piezoelectric micro-electro-mechanical systems (MEMS) are finding an increased interest for applications requiring high frequency operation and high mechanical quality. The aim of this work was to improve piezoelectric MEMS along two main research directio ...

EPFL2007

Titanium oxides and silicates as high-kappa dielectrics: A first-principles investigation

Alfredo Pasquarello

Using density functional theory, we investigate the structural, vibrational, and dielectric properties of titanium oxides and silicates, which have attracted considerable attention in the framework of the quest for alternative high-K materials. For the oxi ...

2005

Chemical beam deposition of titanium dioxide thin films

Giacomo Benvenuti

Titanium dioxide (TiO2) is a widely investigated material for its biological compatibility, high dielectric constant and refractive index, chemical and mechanical resistance, and catalytic activity. Several different techniques are available to produce TiO ...

EPFL2003