Publications by Léa Deillon | EPFL Graph Search

Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, David Hernandez Escobar, Jonathan Aristya Setyadji

Dataset corresponding to the following manuscript: Slagter, A., Setyadji, J.A., Vogt, E.L. et al. Nanoindentation Hardness and Modulus of Al2O3–SiO2–CaO and MnO–SiO2–FeO Inclusions in Iron. Metall Mater Trans A (2024). https://doi.org/10.1007/s11661-024-0 ...

Zenodo2024

Nanoindentation Hardness and Modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO Inclusions in Iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, David Hernandez Escobar, Jonathan Aristya Setyadji

Oxide inclusions appear in steel as a subproduct of steelmaking. These are generally detrimental to alloy properties; however, variations exist in the extent to which different inclusions are harmful because their properties vary as a function of their che ...

SPRINGER2024

Strong silicon oxide inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Joris Pierre Everaerts

Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...

2022

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

3D metal freeform micromanufacturing

Yves Bellouard, Cyril Dénéréaz, Andreas Mortensen, Raphaël Charvet, Léa Deillon, Sacha Jérémy Florentin Pollonghini, Fatmah Ebrahim, Tao Yang, Enrico Casamenti, Luciano Borasi

Despite remarkable progress made in recent years, producing freeform three-dimensional micro-components out of copper, silver or gold and their alloys remains an engineering challenge: current processes are either too slow to be economically viable, or pro ...

2021

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Léa Deillon, Lionel Michelet, Goran Zagar, Marta Fornabaio

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021

Laue microdiffraction characterisation of as-cast and tensile deformed Al microwires

Andreas Mortensen, Helena Van Swygenhoven, Léa Deillon, Steven Van Petegem, Suzanne Godelieve Alphonsine Verheyden

Single-crystalline cast aluminium microwires with a diameter near 15 are characterised by Laue microdiffraction. A microwire in the as-cast condition exhibits a misorientation below over a length of 500 . The measured density of geometrically necessary dis ...

TAYLOR & FRANCIS LTD2019

The effect of size on the plastic deformation of annealed cast aluminium microwires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

Monocrystalline, cast aluminium microwires of diameter (D) below 25 mu m free of micromilling artefacts are annealed under protective atmosphere. Annealing increases the flow stress of all tested microwires, by an amount that is found, in a Haasen plot of ...

2019

Interface microstructure formation of dissimilar Fe/Fe-Mn-C steel RSW joints

Léa Deillon

An experiment was developed to simulate the interface between liquid high manganese carbon steel and solid ultra-low alloyed steel in a thermal gradient, corresponding to the nugget/sheet interface of resistance spot welds. Despite the large difference in ...

Elsevier Science Sa2018

Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires

Andreas Mortensen, Léa Deillon

This data article presents a methodology and the corresponding code developed to perform and process stress relaxation tests where samples display superimposed (i) classical, continuous logarithmic relaxation together with (ii) sudden displacements manifes ...

2018

Solid-liquid interdiffusion (SLID) bonding in the Au-In system: experimental study and 1D modelling

Aïcha Hessler-Wyser, Thierry Hessler, Michel Rappaz, Léa Deillon

Au-In bonds with a nominal composition of about 60 at.% In were fabricated for use in wafer-level packaging of MEMS. The microstructure of the bonds was studied by scanning electron microscopy. The bond hermeticity was then assessed using oxidation of Cu t ...

Institute of Physics2015

Growth of intermetallic compounds in the Au-In system: Experimental study and 1-D modelling

Aïcha Hessler-Wyser, Michel Rappaz, Léa Deillon

The gold indium system is of primary interest for bonding processes such as solid liquid interdiffusion bonding. In order to optimize the manufacturing parameters, it is essential to know which intermetallic compounds (IMCs) are formed when solid Au and li ...

Elsevier2014

Soudure par interdiffusion dans les systèmes Au-In et In-Ni : application à des composants microélectroniques

Léa Deillon

Hermiticity is an essential requirement of a MEMS package for a device to work properly. Hermeticity also must be preserved during the operations following packaging, during which the package bond should not remelt. Bonding temperature is limited however t ...

EPFL2012

Intergranular penetration of liquid gold into stainless steel

Michel Rappaz, Jean-Daniel Wagnière, Denis Favez, Léa Deillon

Intergranular penetration of liquid 18 K gold into a superaustenitic stainless steel, which occurs during laser welding of these two materials, has been studied using a C-ring device which can be put under tensile stresses by a screw. It is shown that liqu ...

Elsevier2011