Recherche

Afficher tous les résultats pour

Accueil

Catégorie

Topics in power engineering

Applied sciences
Électrotechnique
Power engineering
Topics in power engineering

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (28)

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Tailoring Organic/Inorganic Interface Trap States of Metal Oxide/Polyimide toward Improved Vacuum Surface Insulation

Chao Wang, Guang-Yu Sun, Haoxiang Zhao

High-voltage and high-power devices are indispensablein spacecraftfor outer space explorations, whose operations require aerospace materialswith adequate vacuum surface insulation performance. Despite persistentattempts to fabricate such materials, current ...

AMER CHEMICAL SOC2023

Electronic metadevices for terahertz applications

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

The evolution of electronics has largely relied on downscaling to meet the continuous needs for faster and highly integrated devices(1). As the channel length is reduced, however, classic electronic devices face fundamental issues that hinder exploiting ma ...

NATURE PORTFOLIO2023

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Positive Streamer Initiation in SF6/CO2 Based on Zener's Field Ionization

Guang-Yu Sun

In this study, experiments were performed to measure the inception and breakdown voltages of SF6/CO2 mixed gases with varying mixing ratios at two different pressures (1 and 2 bar). Using the preliminary data obtained from the experiments, a 3D particle mo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Metal-wire-embedded alumina insulating material using micro- and nanoscale 3D printing for surface flashover mitigation in a vacuum

Guang-Yu Sun

A micro- and nanoscale 3D printing technique is applied to fabricate a functional insulating material that mitigates surface discharge in a vacuum based on microscopic electron multipactor suppression. The proposed alumina ceramic insulator design consists ...

2022

Ultralow secondary electron emission and improved vacuum surface insulation of polyimide with scalable nanocomposite coating

Chao Wang, Guang-Yu Sun

Polymers with high surface electric insulation capability are greatly demanded in various electrical devices operating in vacuum ambient. Low secondary electron emission (SEE) is favorable to mitigate vacuum flashover by inhibiting the SEE avalanche across ...

ELSEVIER2022

New Technologies to Enhance the Figures-of-Merit of GaN Power Devices

Luca Nela

Gallium Nitride (GaN) has enabled groundbreaking developments in the field of optoelectronics and radio frequency communication. More recently, GaN devices for power conversion applications have demonstrated excellent potential. Thanks to Gallium Nitride w ...

EPFL2022

Some Results of the EU Project FASTGRID

Manuel Bauer

The EU FASTGRID project aimed at improving the REBCO conductor in order to enhance its economical attractiveness for the Superconducting Fault Current Limiter (SFCL). Two approaches were simultaneously investigated: i) the reduction of the tape length thro ...

IEEE Institute of Electrical and Electronics Engineers2022

Partial discharge localization using time reversal: Application to gas insulated switchgear

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami

Gas-insulated switchgear (GIS) are some of the most reliable and most expensive equipment that are nowadays used in power systems. Condition monitoring of the power system equipment can help operators detect defects like partial discharges (PDs) early, pre ...

Elsevier2022

Slip Ring Test Assembly With Increased Breakdown Voltage Limit for High-Voltage Bus Satellites

Alan Howling, Ivo Furno, Fabio Avino

In this article, a setup including a passive gas breakdown mitigation technique for satellite slip ring assemblies (SRAs) is introduced and tested. The setup features a central conducting ring, separated from two external conducting limiting discs (LDs) by ...

2020

Effects of 5 MeV electron irradiation on deep traps and electroluminescence from near-UV InGaN/GaN single quantum well light-emitting diodes with and without InAlN superlattice underlayer

Jean-François Carlin, Nicolas Grandjean, Raphaël Butté, Mauro Mosca, Camille Haller

The electrical properties, electroluminescence (EL) power output and deep trap spectra were studied before and after 5 MeV electron irradiation of near-UV single-quantum-well (SQW) light-emitting diodes (LED) structures differing by the presence or absence ...

IOP PUBLISHING LTD2020

Drastic breakdown field reduction in multilayer DEA

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne, Morgan Almanza

The electrical properties such as the electrical breakdown and the permittivity but also the softness of the elastomer are key factors for the performance of DEA. In order to have the best use of elastomer films, single-layer actuators have been deeply stu ...

2019

Nonlinear electrical conductivity through the thickness of multidirectional carbon fiber composites

Marcos Rubinstein, Anastasios Vassilopoulos, Xi Chen, Jie Li

Lightning strikes pose a serious natural threat to carbon fiber-reinforced poly- mers (CFRPs). Knowledge of the electrical current distribution is essential for modeling the interaction between CFRP with lightning. In most applications, the anisotropy of C ...

2019

Tip connector for fluidic and electrical connection

Philippe Renaud, Yann Barrandon, David Vincent Bonzon, Georges Muller, Jean-Baptiste Bureau, David Forchelet, Nicolas Uffer

A connector for providing both a fluidic and electrical connection is disclosed, said connector having a proximal end, a distal end and an elongated body in between, characterized in that the elongated body has an inner cavity spanning throughout its lengt ...

2018

Method and Device for Non-Invasive Blood Pressure Measurement

David Atienza Alonso, Srinivasan Murali, Francisco Javier Rincon Vallejos, Alair Dias Junior

A system for measuring blood pressure of a user that comprises an ElectroCardioGram (ECG) circuit with at least two ECG electrodes configured to obtain an electrical activity of a heart of the user by measuring the electrical signals detected at the at lea ...

2017

In-Plane-Gate GaN Transistors for High-Power RF Applications

Elison de Nazareth Matioli, Giovanni Santoruvo

In-plane-gatefield-effect transistors (IPGFETs) offer an innovative device architecture in which the channel conductivity is modulated by the electric field from the 2D electron gas in the two adjacent in-plane gates, isolated by etched trenches. The plana ...

Institute of Electrical and Electronics Engineers2017

Charge-Based Modeling of Double-Gate and Nanowire Junctionless FETs Including Interface-Trapped Charges

Jean-Michel Sallese, Farzan Jazaeri, Ashkhen Yesayan

Nanowire (NW) semiconductors are interesting devices for being used as sensors. Such NWs are doped silicon channels with electrical contacts at both ends, which is a kind of the so-called junctionless (JL) device. However, in contrast with the state-of-the ...

Institute of Electrical and Electronics Engineers2016

Substrate modeling of parasitic couplings in Smart Power ICs with generalized lumped devices

Camillo Stefanucci

Today automotive industry is demanding more and more compact solutions for embedded electronics to be interfaced with vehicles components such as motor drivers, igniters and car communication buses. That is why Smart Power Integrated Circuits (IC) have bee ...

EPFL2016

Page 1 sur 2