Publications associées à Proximity effect (electromagnetism)

Modeling, Optimization and Design of High Power Medium Frequency Transformers

Nowadays, direct current (DC) technology is increasing its presence in alternating current (AC) power systems. This trend is enabled by the progress in energy conversion through semiconductor devices and power electronics. Therefore, it is possible to imag ...

EPFL2023

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...

IEEE Institute of Electrical and Electronics Engineers2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...

2021

Intrinsic luminescence blinking from plasmonic nanojunctions

Tobias Kippenberg, Christophe Marcel Georges Galland, Giulia Tagliabue, Magalí Alejandra Lingenfelder, Sachin Suresh Verlekar, Wen Chen, Karla Banjac, Aqeel Ahmed, Philippe Andreas Rölli

Plasmonic nanojunctions, consisting of adjacent metal structures with nanometre gaps, can support localised plasmon resonances that boost light matter interactions and concentrate electromagnetic fields at the nanoscale. In this regime, the optical respons ...

Nature Research2021

Preliminary Design of DEMO PF Coils Based on EU DEMO 2018 Baseline

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The dimensioning of Winding Packs and allocation of materials in DEMO PF coils is proposed based on the requirements defined by the EUROfusion 2018 DEMO baseline. The coils are pancake-wound and use two types of forced flow cable-in-conduit conductors. The ...

IEEE Institute of Electrical and Electronics Engineers2020

97.4%-Efficient All-GaN Dual-Active-Bridge Converter with High Step-up High-Frequency Matrix Transformer

Elison de Nazareth Matioli, Armin Jafari, Palliyage Srilak Nirmana Perera, Mohammad Samizadeh Nikooytabalvandani

In this work, we demonstrate a state-of-the-art high step-up/down dual-active-bridge (DAB) converter designed with GaN transistors, to achieve a high efficiency and large power-density. A quasi-planar matrix transformer with high step-up/down ratio is demo ...

2020

AC Loss Measurement of the DEMO TF React&Wind Conductor Prototype No. 2

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

The EUROfusion DEMO is being designed as the fusion machine to be built after ITER. During the preconceptual phase, several design options are investigated by theoretical analyses as well as tests on newly developed conductor prototypes. One design option ...

IEEE Institute of Electrical and Electronics Engineers2020

Very-High-Speed Miniaturized Permanent Magnet Motors: Modeling and Experimental Validation

Yves Perriard, Guillaume Paul-André Burnand

The purpose of this paper is to present an experimental method to separate losses components due to the rotation of the rotor in very-high-speed permanent magnet machines with ball bearings. In addition, it presents and validates an analytical model for th ...

2019

Permeance Based Modeling of Magnetic Hysteresis with Inclusion of Eddy Current Effect

Drazen Dujic, Min Luo, Jost Allmeling

Magnetic hysteresis together with eddy current effects are typically present in metal based core materials and contribute significantly to the nonlinearity and power loss of the magnetic components operating in power electronic converters. In order to inve ...

IEEE2018

Dynamic Modeling of Magnetic Components for Circuit Simulation of Power Electronic Systems

Min Luo

Magnetic components play an important role in a power electronic converter system. They provide energy buffering, galvanic isolation and voltage ratio conversion and have significant impact on the overall performance of the system regarding power efficienc ...

EPFL2018

Central solenoid winding pack design for DEMO

Rainer Wesche, Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov

The present study aims to reduce the outer radius of the central solenoid (CS) with respect to its nominal size specified by EUROfusion for a maintained CS magnetic flux. A reduced outer CS radius would allow the reduction of the overall size and cost of t ...

ELSEVIER2017

Collective spin excitations of helices and magnetic skyrmions: review and perspectives of magnonics in non-centrosymmetric magnets

Dirk Grundler

Magnetic materials hosting correlated electrons play an important role for information technology and signal processing. The currently used ferro-, ferri- and antiferromagnetic materials provide microscopic moments (spins) that are mainly collinear. Recent ...

Iop Publishing Ltd2017

Design, Manufacture and Test of a 82kA React&Wind TF Conductor for DEMO

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Rainer Wesche

The Toroidal Field Coils (TFC) of the EUROFusion DEMO reactor call for Nb3Sn conductor with high field and high current. Another major requirement is the cost effectiveness, to keep the ratio of investment to electric power in the same range of the competi ...

IEEE Institute of Electrical and Electronics Engineers2016

High resolution eddy current inspection and eddy current testing for additive manufacturing

David Florian Hippert

Non-destructive testing (NDT) is one of the key method developed for the safety mechanism of many industrial fields, e.g. aerospace, oil and gas and power industries. Among the NDT techniques, eddy current testing belongs to the well-established ones and h ...

EPFL2016

Strain Management in HTS High Current Cables

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

The best performing HTS conductors are available in the form of thin tapes with operating current in the range of 200 A at the operating conditions. To realize conductors with high current carrying capability, in the range of several tens of kA, a large nu ...

IEEE Institute of Electrical and Electronics Engineers2015

Electrically Pumped Vertical-External-Cavity Surface-Emitting Lasers With Patterned Tunnel Junction for Single Transversal-Mode Emission

Elyahou Kapon, Alexei Sirbu

This paper reports on a numerical analysis of methods for current injection into AlInGaAs/InP tunnel-junction electrically pumped vertical-external-cavity surface-emitting lasers. The tunnel junction is patterned to minimize the current crowding effect and ...

Ieee-Inst Electrical Electronics Engineers Inc2015

Collective Flux Jumps observed in the Operation of the EDIPO Magnet

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Stephen Alfred March

The tilted head race track coils of the EDIPO test facility are wound with cable-in-conduit conductors made by high current density Nb3Sn strands, Jc = 2400 A/mm2 at 12 T – 4.2 K. Since the commissioning of the coils, frequent voltage spikes were observed ...

IEEE Institute of Electrical and Electronics Engineers2014

Positive exchange bias in thin film multilayers produced with nano-oxide layer

We report a positive exchange bias in thin film multilayers produced with nano-oxide layer. The positive exchange bias resulted from an antiferromagnetic interfacial exchange coupling between the ferromagnetic CoFe and the antiferromagnetic CoO layers, whi ...

Amer Inst Physics2013

Modeling of High-Frequency Electromagnetic Effects on an Ironless Inductive Position Sensor

Yves Perriard, Alessandro Danisi, Alessandro Masi

The ironless inductive position sensor (I2PS) is a five-coil air-cored structure that senses the variation of flux linkage between supply and sense coils and relates it to the linear position of a moving coil. In air-cored structures, the skin and proximit ...

Institute of Electrical and Electronics Engineers2013

Fabrication Trials of Round Strands Composed of Coated Conductor Tapes

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

Various techniques have been proposed in order to assemble coated conductor tapes into high current strands. In this work, the preparation of high current capacity round strands starting from industrial coated conductors has been investigated. Round, twist ...

IEEE Institute of Electrical and Electronics Engineers2013