Publications associées à Inductance

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè, Chiara Frittitta

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Spin-Reorientation-Driven Linear Magnetoelectric Effect in Topological Antiferromagnet Cu3TeO6

Helmuth Berger

The search for new materials for energy -efficient electronic devices has gained unprecedented importance. Among the various classes of magnetic materials driving this search are antiferromagnets, magnetoelectrics, and systems with topological spin excitat ...

Amer Physical Soc2024

Gate unit for a gate-commutated thyristor and integrated gate-commutated thyristor

Drazen Dujic, Jakub Kucka

The invention relates to a gate unit (22) for controlling a gate commutated thyristor (21), comprising: - a voltage selector (26) for selectively applying a high supply potential (Vpos), a middle supply potential (Vmid), and a low supply potential (Vneg); ...

2023

NbN films with high kinetic inductance for high-quality compact superconducting resonators

Edoardo Charbon, Pasquale Scarlino, Fabrizio Minganti, Simone Frasca, Marco Scigliuzzo, Vincent Jean Yves Jouanny, Fabian Oppliger, Roberto Musio

Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on NbN thin films present a o ...

American Physical Society (APS)2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Marcus Cemes, Ambrine Douhane

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

High-Kinetic Inductance Superconducting Technology for Quantum Applications

Simone Frasca

Superconducting materials present unique properties, which make a potential technological platform based on superconductors extremely appealing for a wide set of applications, both classical and not. Among these classes of materials, high-kinetic inductanc ...

EPFL2023

A review of the modeling approaches of the lightning M-component with special attention to their current and electric field characteristics

Farhad Rachidi-Haeri, Marcos Rubinstein, Mohammad Azadifar, Carlo Alberto Nucci, Qi Li

In this paper, we present the characteristics of current, electric fields and modeling approaches of lightning M-component mode of charge transfer. We consider both the classical M-components (occurring after return strokes) and M-component-type ICC (Initi ...

Elsevier2023

Time-Domain Integration of Broadband Terahertz Pulses via Tapered Two-Wire Waveguide

Alessandro Tomasino

In this work, we report on the implementation of a time-domain integrator device operating on arbitrary broadband Terahertz (THz) pulses. This analog signal-processing functionality is implemented by employing a two-wire waveguide (TWWG) variant, based on ...

IEEE2023

An Implantable Inductive Sensor for Direct and Continuous Monitoring of the Pulmonary Artery Cross-Sectional Area

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents a novel method for the measure of the cross-sectional area (CSA) of an artery to be used for the direct and continuous (24/7) monitoring of cardiac output (CO). The method is based on the inductance change of an anchoring loop mounted o ...

IEEE2022

Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè

Paschen failures in ITER, W7-X and JT60 superconducting coils at the acceptance tests have shown that it is highly desirable to lower the coil discharge voltage (U-d) of the DEMO Toroidal Field (TF) coils. Another benefit of lowering the U-d might be the r ...

IEEE Institute of Electrical and Electronics Engineers2022

Development of stencil lithography for stretchable interconnects

Yi-Chiang Sun

The growing needs for human healthcare have driven the development of wearable devices for monitoring the health status of an individual. Polymers represent a promising platform for such devices due to their ability to form an intimate contact between soft ...

EPFL2022

Low and high frequency electromagnetic forces: numerical modelling and practical applications

Marco Riccardi

The understanding and manipulation of nanoscale analytes is a central theme in nanotechnology and has been one of the main driving forces behind the development of this field as we know it today. Furthermore, such a technology has the potential to also rev ...

EPFL2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

Enhanced-DAB Converter: Comprehensive Design Evaluation

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani, Furkan Karakaya

Soft switching in dual-active-bridge (DAB) converters enables their efficient operation at high frequencies, where the reduction in the size of magnetic components could result in ultra-high power densities. Nonetheless, losing soft-switching at high frequ ...

IEEE2021

Schmitt trigger-based control strategy for the discharge phase of an ultra-high-voltage bidirectional flyback

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

The control strategy to discharge a capacitive load such as a dielectric elastomer actuator charged to several kilo-volts is critical to obtain a safe and reliable actuation. In the case of this publication, an ultra-high voltage bidirectional flyback conv ...

IEEE2021

Ultra-High-Voltage (7-kV) Bidirectional Flyback Converter Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Morgan Almanza, Raphaël Johannes Charles Mottet, Lucas Pniak

Dielectric elastomer actuators (DEAs) have extremely advantageous characteristics such as lightness, compactness, flexibility, and large displacements. However, in order to operate, they can require voltages in the order of several thousands of volts. Thus ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Evgeny Solodko

EDIPO 2 (the upgraded EDIPO test facility) will provide a unique testbed for superconducting cables for fusion magnets,accelerators, and other applications. Compared to the previous magnet assembly, the magnetic field is enhanced from 12.35 T to 15 T, the ...

IEEE Institute of Electrical and Electronics Engineers2021