Publications associées à Nitrure de titane

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Structure, Oxygen Content and Electric Properties of Titanium Nitride Electrodes in TiNx/La:HfO2/TiNx Stacks Grown by PEALD on SiO2/Si

Philippe Buffat, Elena Suvorova Buffat

This work reports experimental results of the quantitative determination of oxygen and band gap measurement in the TiNx electrodes in planar TiNx top/La:HfO2/TiNx bottom MIM stacks obtained by plasma enhanced atomic layer deposition on SiO2. Methodological ...

2022

Piezoelectric suspended microchannel resonators

Damien Maillard

The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level. The systems developed for these purposes consist of piezoelectrica ...

EPFL2022

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jing Gao, Meng Xia, Yuhang Liu, Dan Ren, Jun Li

Solar-driven carbon dioxide reduction has witnessed a renaissance in the past decades, but the system suffers from low reaction rates. Here the authors develop a copper/tin-oxide electrocatalyst, achieving a new benchmark solar-to-CO energy conversion effi ...

Nature Portfolio2022

Adsorption of organic matter on titanium surfaces with nano- and micro-scale roughness studied with the electrochemical quartz crystal microbalance dissipation technique

Stefano Mischler, Anna Neus Igual Muñoz

Adsorption of calf serum organic matter from a phosphate-buffered solution was studied using the electrochemical quartz crystal microbalance with additional dissipation measurements. Two types of crystal surfaces were used: one rough with micrometer-range ...

AIP Publishing2021

Corrosion behaviour of nitrided ferritic stainless steels for use in solid oxide fuel cell devices

Jan Van Herle, Manuel Bianco, Stéphane François Jean Poitel

Plasma nitriding was applied to ferritic stainless steel substrates to improve their performances as interconnects for solid oxide fuel cell devices. The samples underwent electrical conductivity test and SEM/EDS, TEM/EDS, environmental-SEM analyses. The f ...

2020

In-situ experimental benchmarking of solid oxide fuel cell metal interconnect solutions

Jan Van Herle, Stefan Diethelm, Priscilla Caliandro, Manuel Bianco

The progress in the diffusion of solid oxide fuel cell (SOFC) as commercial devices is not paired by literature production. Articles describing the behaviour of SOFC stacks are rare because of confidentiality reasons for commercial suppliers while research ...

2020

Effect of the electrochemical characteristics of titanium on the adsorption kinetics of albumin

Anna Neus Igual Muñoz

An electrochemical quartz crystal microbalance (EQCM) was used to examine the electrochemical behaviour of pure titanium in phosphate buffered saline (PBS) and PBS-containing bovine serum albumin (BSA) solutions, and the associated adsorption characteristi ...

2019

Rapid evaluation of bioactive Ti-based surfaces using an in vitro titration method

Paul Bowen, Jacques Lemaître, Weitian Zhao

The prediction of implant behavior in vivo by the use of easy-to-perform in vitro methods is of great interest in biomaterials research. Simulated body fluids (SBFs) have been proposed and widely used to evaluate the bone-bonding ability of implant materia ...

Springer2019

Photocatalytic indoor/outdoor air treatment and bacterial inactivation on CuxO/TiO2 prepared by HiPIMS on polyester cloth under low intensity visible light

Sami Rtimi

In this study, photoactive CuxO/TiO2 coatings were prepared using magnetron sputtering operated at different powers and modes (Direct-current magnetron sputtering and High Power Impulse magnetron sputtering). Indoor/outdoor air pollutions (Volatile Organic ...

2019

Chemo-mechanical effects on the tribocorrosion behavior of titanium/ceramic dental implant pairs in artificial saliva

Anna Neus Igual Muñoz, Alejandro Roda Buch

In this paper, the degradation mechanisms of the ceramic and the metal in Titanium/Zirconia pairs for biomedical applications were analyzed. To do that, an experimental set-up with well-controlled mechanical and chemical conditions was used based on a unid ...

2019

Adsorption of HPDX and CaHPOx (x=1, ...,4) molecules on anatase TiO2 (001) surfaces

Alfonso Baldereschi, Michel Posternak

perform DFT calculations within the COSMO framework to study the adsorption properties of the CaHPOx (x = 1,...,4) phosphate family, and of the related HPOx acids, on a paradigmatic anatase (001) surface. Of particular interest is CaHPO4, a precursor of hy ...

ELSEVIER SCIENCE BV2019

III-Nitride Semiconductor Photonic Nanocavities on Silicon

Ian Michael Rousseau

Optical nanocavities enhance light-matter interaction due to their high quality factors (Q) and small modal volumes (V). The control of light-matter interaction lies at the heart of potential applications for integrated optical circuits, including optical ...

EPFL2018

Organic-Inorganic Hybrid Planarization and Water Vapor Barrier Coatings on Cellulose Nanofibrils Substrates

Yves Leterrier, Feyza Karasu Kiliç

Cellulose nanofibrils (CNF) can be produced in the form of thin, transparent and flexible films. However, the permeability of such materials to oxygen and water vapor is very sensitive to moisture, which limits their potential for a variety of packaging an ...

2018

Enhanced piezoelectric properties of c-axis textured aluminium scandium nitride thin films with high scandium content: influence of intrinsic stress and sputtering parameters

Paul Muralt, Gabriel Christmann, Stefan Mertin, Silviu Cosmin Sandu, Vladimir Pashchenko, Clemens Benedict Nyffeler, Mohammad Fazel Parsapour Kolour

Aluminium scandium nitride (ASN) exhibits a largely enhanced piezoelectric response as compared to aluminium nitride (AlN), which makes it an upcoming piezoelectric material for use in next generation RF filters, sensors, actuators and energy harvesting de ...

Ieee2017

Quantification of scattering loss of III-nitride photonic crystal cavities in the blue spectral range

Nicolas Grandjean, Jean-François Carlin, Raphaël Butté, Ian Michael Rousseau, Irene Sánchez Arribas, Kanako Shojiki

The mechanisms contributing to experimental quality factors of shortwavelength (lambda = 440-480 nm) III-nitride on silicon one-dimensional photonic crystal cavities were quantified. Fluctuations in fundamental and first-order cavity mode wavelength and qu ...

Amer Physical Soc2017

Improving Osteoblast Response In Vitro by a Nanostructured Thin Film with Titanium Carbide and Titanium Oxides Clustered around Graphitic Carbon

Giovanni Longo

Introduction Recently, we introduced a new deposition method, based on Ion Plating Plasma Assisted technology, to coat titanium implants with a thin but hard nanostructured layer composed of titanium carbide and titanium oxides, clustered around graphitic ...

Public Library of Science2016

Implant-based three-dimensional superimposition of the growing mandible in a rabbit model

The reliable assessment of craniofacial morphological changes during growth requires invariant regions for image registration. As these regions have not yet been identified in three dimensions, intra-osseous implants are required as fiducial markers for th ...

Oxford Univ Press2016