Concept

Monocrystalline silicon

Publications associées (31)

Direct high-temperature growth of GaN on Si using trimethylaluminum preflow enabling vertically-conducting heterostructures

Elison de Nazareth Matioli, Alessandro Floriduz

In this work, we demonstrate that GaN can be directly grown at high temperature on Si(111) substrates by metalorganic CVD without using any intentional AlN buffer, by simply employing a trimethylaluminum (TMAl) preflow. We found that n-GaN layers directly ...

Iop Publishing Ltd2024

Bodily implant microelectrode and bodily implant microelectrode fabrication method

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

The present invention concerns a bodily implantable or probe device and microelectrode fabrication method comprising providing at least one silicon substrate including an electronic device or unit; providing, on a first side of the silicon substrate, at le ...

2024

Enhancing Efficiency of Industrially-Compatible Monolithic Perovskite/Silicon Tandem Solar Cells with Dually-Mixed Self-Assembled Monolayers

Mohammad Khaja Nazeeruddin, Peng Gao, Ye Yang, Chaohui Li

The antisolvent-assisted spin-coating still lags behind the thermal evaporation method in fabricating perovskite films atop industrially textured silicon wafers in making monolithic perovskite/silicon solar cells (P/S-TSCs). The inhomogeneity of hole-selec ...

Wiley-V C H Verlag Gmbh2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Performance and degradation in silicon PV systems under outdoor conditions in relation to reliability aspects of silicon PV modules - Summary of results of COST Action PEARL PV

Andrew Wayne Fairbrother, David Moser

This paper presents the main results of COST Action PEARL PV, aiming at finding connections between the observed performance of monitored PV systems and degradation causes and failure modes according to literature with a focus on the most dominant technolo ...

IEEE2023

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches

Herbert Shea, Amir Firouzeh, Edouard Franck Vincent Gustave Leroy, Vesna Bacheva, Aiste Balciunaite

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoco ...

SPRINGERNATURE2023

Momentum-Space Imaging of Ultra-Thin Electron Liquids in δ-Doped Silicon

Gabriel Aeppli, Nicolò D'Anna

Two-dimensional dopant layers (δ-layers) in semiconductors provide the high-mobility electron liquids (2DELs) needed for nanoscale quantum-electronic devices. Key parameters such as carrier densities, effective masses, and confinement thicknesses for 2DELs ...

WILEY2023

Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts

Franz-Josef Haug, Luca Massimiliano Antognini, Josua Andreas Stückelberger, Xinyu Zhang, Zhao Wang, Jie Yang

We demonstrate the beneficial effect of a pre-annealing step prior to the boron diffusion on passivation and contact resistivity of industrially LPCVD deposited poly-Si/SiOX hole-selective contacts. We investigate the influence of the pre-annealing tempera ...

ELSEVIER2023

Rear textured p-type high temperature passivating contacts and their implementation in perovskite/silicon tandem cells

Christophe Ballif, Quentin Thomas Jeangros, Antoine Descoeudres, Andrea Ingenito, Arnaud Walter, Sylvain Nicolay, Soo-Jin Moon, Philippe Wyss

Silicon solar cells based on high temperature passivating contacts are becoming mainstream in the photovoltaic industry. Here, we developed a high-quality boron-doped poly-silicon hole contact. When combined with a co-processed phosphorus-doped poly-silico ...

Royal Soc Chemistry2023

Investigation and Mitigation of Moisture- and Potential-Induced Degradation Mechanisms of Silicon Heterojunction Solar Cells and Modules

Olatz Arriaga Arruti

Photovoltaic (PV) technology is one of the most promising renewable energy sources. The PV market is dominated by crystalline silicon (c-Si) based technologies, thus ensuring their long-term performance is of paramount importance for manufacturers, investo ...

EPFL2023

Supramolecular Polymer Brushes

Friederike Katharina Metze

Thin polymer coatings present a method to modify the surface properties of underlying substrates. Polymer-coated surfaces have been used as anticorrosive materials, surfaces with special wetting properties, antifriction materials, and as materials for biom ...

EPFL2023

A universal route to efficient non-linear response via Thomson scattering in linear solids

Gabriel Aeppli, Joe Martin Bailey, Ji Zhou, Cheng Wang, Junjie Li, Min Chen

Non-linear materials are cornerstones of modern optics and electronics. Strong dependence on the intrinsic properties of particular materials, however, inhibits the at-will extension of demanding non-linear effects, especially those second-order ones, to w ...

OXFORD UNIV PRESS2023

Vapor Deposition of Perovskite Solar Cells

Quentin Jean-Marie Armand Guesnay

Thanks to the continuous improvement of crystalline silicon (c-Si) solar cells, largely dominating the market, photovoltaic electricity is nowadays the cheapest source of energy on the market. Yet, solar energy is far from being completely harvested, as t ...

EPFL2023

SiNx and AlOx Nanolayers in Hole Selective Passivating Contacts for High Efficiency Silicon Solar Cells

Audrey Marie Isabelle Morisset, Xinya Niu

The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiNx and AlOx nanolayers as promising interface dielectrics to enable high efficiency ho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Status and perspectives of crystalline silicon photovoltaics in research and industry

Christophe Ballif, Franz-Josef Haug, Mathieu Gérard Boccard

Crystalline silicon (c-Si) photovoltaics has long been considered energy intensive and costly. Over the past decades, spectacular improvements along the manufacturing chain have made c-Si a low-cost source of electricity that can no longer be ignored. Over ...

2022

Material Development for Perovskite/Silicon Tandem Photovoltaics

Peter Joseph Fiala

The developed world is built on the fact that energy is readily available and functionally infinite. The electricity from the wall, the gas at the station, and the heat in our homes are reliable and low-cost. But this comfort is so far only possible throug ...

EPFL2022

Wireless neuromodulation with porous silicon

Silvestro Micera

Wireless optoelectronic devices are fabricated by controlling the porosity of p-type silicon, enabling in vivo efficient, non-genetic optoelectronic modulation of peripheral nerve activity. ...

NATURE PORTFOLIO2022

Impact of rapid thermal processing on bulk and surface recombination mechanisms in FZ silicon with fired passivating contacts

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Audrey Marie Isabelle Morisset, Sofia Libraro, Mario Joe Lehmann

We investigate bulk and interface recombination in crystalline silicon with p-type fired passivating contacts. These consist of a chemical oxide and an in-situ doped layer of SiCx with low carbon content. Following a rapid thermal annealing to activate the ...

ELSEVIER2022

Carrier-selective contacts using metal compounds for crystalline silicon solar cells

Mathieu Gérard Boccard, Julie Amandine Dreon

Solar cells rely on the efficient generation of electrons and holes and the subsequent collection of these photoexcited charge carriers at spatially separated electrodes. High wafer quality is now commonplace for crystalline silicon (c-Si) based solar cell ...

WILEY2023

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022