Publications associées à Matière première

Modeling friction and wear using an adaptive discrete-continuum coupling

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Localized Ionic Reinforcement of Double Network Granular Hydrogels

Esther Amstad, Alexandra Thoma

Nature produces soft materials with fascinating combinations of mechanical properties. For example, the mussel byssus embodies a combination of stiffness and toughness, a feature that is unmatched by synthetic hydrogels. Key to enabling these excellent mec ...

Wiley-V C H Verlag Gmbh2024

Nature-Inspired Stalactite Nanopores for Biosensing and Energy Harvesting

Aleksandra Radenovic, Mukeshchand Thakur, Andrey Chernev, Vasily Artemov, Lucie Navratilova, Nianduo Cai, Yunfei Teng, Tzu-Heng Chen, Victor Carle Adrien Boureau

Nature provides a wide range of self-assembled structures from the nanoscale to the macroscale. Under the right thermodynamic conditions and with the appropriate material supply, structures like stalactites, icicles, and corals can grow. However, the natur ...

Wiley-V C H Verlag Gmbh2023

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect ...

Zenodo2023

Steel Pipes and Global Networks: The Influence of Dalmine S.p.A in Shaping Resource Extraction Infrastructures

Anna Karla De Almeida Milani

Pipelines for extracting oil, gas, water, and supporting energy systems are part of the infrastructure of extractive sites, especially marked in countries with less urbanized areas. Throughout the twentieth century, such regions were influenced by economic ...

2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Kevin Sivula, Jun Ho Yum, Marina Caroline Michèle Caretti, Benjamin Goldman, Rebekah Anne Wells, Simon Nussbaum, Emeline Cécile Rideau, Loï Charles Carbone, Elizaveta Potapova Mensi, Linda Lazouni, Hannah Elizabeth Johnson

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023

Selective Growth of van der Waals Heterostructures Enabled by Electron-Beam Irradiation

Aleksandra Radenovic, Michal Daniel Macha

Van der Waals heterostructures (vdWHSs) enable the fabricationof complex electronic devices based on two-dimensional (2D) materials.Ideally, these vdWHSs should be fabricated in a scalable and repeatableway and only in the specific areas of the substrate t ...

AMER CHEMICAL SOC2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim, Ryan Mitchell van Dommelen

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

Strengthening mechanisms in dilute and random solid solution high-entropy BCC alloys

Alireza Ghafarollahi

Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...

EPFL2022

Mechanical reinforcement of granular hydrogels

Esther Amstad, Francesca Bono, Alvaro Lino Boris Charlet

Granular hydrogels are composed of hydrogel-based microparticles, so-called microgels, that are densely packed to form an ink that can be 3D printed, injected or cast into macroscopic structures. They are frequently used as tissue engineering scaffolds bec ...

ROYAL SOC CHEMISTRY2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

Mechanical Properties of FRP Materials at Elevated Temperature. Definition of a Temperature Conversion Factor for Design in Service Conditions

Thomas Keller, Mário Alexandre De Jesus Garrido

One of the main concerns about the use of fibre reinforced polymer (FRP) materials in civil engineering structural applications is the potential reduction of their stiffness- and strength-related properties when exposed to elevated temperature. The first p ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Manufacturing and toughening effects on the material properties of wind turbine blade adhesives

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid adhesives can be developed using commercially available adhesive materials and customized to the required loading conditions. In this paper, SPABONDTM 820HTA (non-toughened) and SPABONDTM 840HTA (toughened) adhesives are hybridized by two strategies ...

2022

How free exciton-exciton annihilation lets bound exciton emission dominate the photoluminescence of 2D-perovskites under high-fluence pulsed excitation at cryogenic temperatures

Michael Graetzel, Jovana Milic, Yang Li, Algirdas Ducinskas

Photoluminescence (PL) spectra of atomically thin 2D lead iodide perovskite films are shown to depend on excited-state density, especially at cryogenic temperatures. At high excited-state densities and low temperatures, free exciton (FE) emission is so sup ...

AMER INST PHYSICS2021

A data-driven perspective on the colours of metal-organic frameworks

Berend Smit, Luc Patiny, Seyedmohamad Moosavi, Kevin Maik Jablonka, Mehrdad Asgari, Christopher Patrick Ireland

Colour is at the core of chemistry and has been fascinating humans since ancient times. It is also a key descriptor of optoelectronic properties of materials and is often used to assess the success of a synthesis. However, predicting the colour of a materi ...

2021

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Roland Logé, Christian Leinenbach, Nikola Kalentics, Markus Strobl

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

Atomic layer deposition of Ni and Ni80Fe20 for tubular spin-wave nanocavities

Maria Carmen Giordano

Magnetic thin films and magnetic nanostructures have become essential components of modern technological applications. Modern branches of magnetisms focus on spin-charge coupling (spintronics) and the collective excitation of spin waves in magnetically ord ...

EPFL2021

From vesicles to materials: bioinspired strategies for fabricating hierarchically structured soft matter

Esther Amstad

Certain organisms including species of mollusks, polychaetes, onychophorans and arthropods produce exceptional polymeric materials outside their bodies under ambient conditions using concentrated fluid protein precursors. While much is understood about the ...

ROYAL SOC2021