Publications associées à Quartz (électronique)

Controlling crystal cleavage in focused ion beam shaped specimens for surface spectroscopy

Philip Johannes Walter Moll, Matthias Carsten Putzke, Andrew Scott Hunter

Our understanding of quantum materials is commonly based on precise determinations of their electronic spectrum by spectroscopic means, most notably angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy. Both require atomicall ...

Aip Publishing2024

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Alberto Beccari, Nils Johan Engelsen

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Experimental observation of topological transition in linear and nonlinear parametric oscillators

Romain Christophe Rémy Fleury, Benjamin Apffel

Parametric oscillators are examples of externally driven systems that can exhibit two stable states with opposite phase depending on the initial conditions. In this work, we propose to study what happens when the external forcing is perturbed by a continuo ...

2024

Room-temperature quantum optomechanics using an ultralow noise cavity

Tobias Kippenberg, Alberto Beccari, Nils Johan Engelsen, Guanhao Huang

At room temperature, mechanical motion driven by the quantum backaction of light has been observed only in pioneering experiments in which an optical restoring force controls the oscillator stiffness1,2. For solid-state mechanical resonators in which oscil ...

Nature Portfolio2024

Transversal Spurious Mode Suppression in Ultra-Large-Coupling SH0 Acoustic Resonators on YX36 degrees-Cut Lithium Niobate

Luis Guillermo Villanueva Torrijo, Silvan Stettler

This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large e16 piezoelectric coefficient of YX36 degrees.-cut LNO, fabricated ...

Institute of Electrical and Electronics Engineers2023

A 5G n77 Filter Using Shear Bulk Mode Resonator With Crystalline X-cut Lithium Niobate Films

Luis Guillermo Villanueva Torrijo, Florian Fernand Hartmann

This paper presents the use of a shear bulk acoustic mode resonator made of a membrane of X-cut lithium niobate (LiNbO3) for ultra-wide band filter applications. Aluminum interdigitated (IDT) electrodes are deposited on top of the LiNbO3 thin film as well ...

IEEE2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Methods for Calibrating the Electrochemical Quartz Crystal Microbalance: Frequency to Mass and Compensation for Viscous Load

Stefano Mischler, Anna Neus Igual Muñoz

The main output from an Electrochemical Quartz Crystal Microbalance is a frequency shift. This note describes how to separate the mass- and viscous load contributions to this shift by a calibration procedure. The mass calibration is made by electroplating ...

MDPI2023

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Zenodo2023

Toward Band n78 Shear Bulk Acoustic Resonators Using Crystalline Y-Cut Lithium Niobate Films With Spurious Suppression

Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli, Victor Plessky

This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...

Institute of Electrical and Electronics Engineers2023

Nanomechanical resonators with low dissipation for quantum optomechanics

Alberto Beccari

Fields of technology as diverse as microwave filter construction, characterization of material interfaces with atomic precision, and detection of gravitational waves from astronomical sources employ mechanical resonators at their core. The utility of mecha ...

EPFL2023

Charge fluctuations in the intermediate-valence ground state of SmCoIn5

Nicola Colonna, Vladimir N. Strocov, Neeraj Kumar

The microscopic mechanism of heavy band formation, relevant for unconventional superconductivity in CeCoIn5 and other Ce-based heavy fermion materials, depends strongly on the efficiency with which f electrons are delocalized from the rare earth sites and ...

NATURE PORTFOLIO2023

Murunskite - a new class of functional material

Davor Tolj

The subject of the present work is discovery and in-depth characterization of a new class of functional materials. Tuning of the bond polarity and orbital occupation with a goal of establishing balance between localization and delocalization of electrons - ...

EPFL2023

What do we talk about, when we talk about single-crystal termination-dependent selectivity of Cu electrocatalysts for CO2 reduction? A data-driven retrospective

Kevin Rossi

We mine from the literature experimental data on the CO2 electrochemical reduction selectivity of Cu single crystal surfaces. We then probe the accuracy of a machine learning model trained to predict faradaic efficiencies for 11 CO2 reduction reaction prod ...

ROYAL SOC CHEMISTRY2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Loïc Benoît Tissot-Daguette, Elias Sebastian Klauser, Florent Alexandre Boudoire, Nikola Kalentics, Nicolas Blondiaux, Lisa Salamin

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

Carolina Baruffi, Christian Brandl

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Pergamon-Elsevier Science Ltd2023

Terahertz waveform synthesis in integrated thin-film lithium niobate platform

Ileana-Cristina Benea-Chelmus, Jérôme Faist, Francesca Fabiana Settembrini

Bridging the "terahertz gap" relies upon synthesizing arbitrary waveforms in the terahertz domain enabling applications that require both narrow band sources for sensing and few-cycle drives for classical and quantum objects. However, realization of custom ...

Nature Portfolio2023

Programmable Silicon Nitride Photonic Integrated Circuits

Tobias Kippenberg, Rui Ning Wang, Anat Siddharth, Viacheslav Snigirev, Andrea Bancora, Andrey Voloshin, Vladimir Shadymov

Silicon Nitride (Si3N4) photonic integrated circuits (PICs) have emerged as core technology in a variety of applications ranging from LIDAR to quantum control and computing. However, the need for high-speed, low-voltage tuning and modulation has been a lon ...

IEEE2023

Switching losses in power devices: From dynamic on resistance to output capacitance hysteresis

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Hongkeng Zhu, Armin Jafari, Palliyage Srilak Nirmana Perera

In this paper, we review some of the main methods to characterize on-state and off-state losses in wide-band-gap devices under switching conditions. In the off-state, we will discuss about losses related to charging and discharging the output capacitance i ...

IEEE2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023