Publications associées à Reflective array antenna

Design Methodology for Wideband Bowtie Patch Antenna for 5G mmWave Applications

Millimeter wave (mmWave) frequencies has become a research area of interest in recent years because of providing broad available bandwidth and thus higher data rates. Wideband mmWave antenna is one of the important development areas in wireless communicati ...

IEEE2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Multi-antenna 3D pattern design for millimeter-wave vehicular communications

German Augusto Ramirez Arroyave

The transformation of the automotive industry towards ubiquitous connection of vehicles with all kind of external agents (V2X) motivates the use of a wide range of frequencies for several applications. Millimeter-wave (mmWave) connectivity represents a par ...

2022

Integration concept of an Electron Cyclotron System in DEMO

René Chavan, Minh Quang Tran, Hartmut Zohm, Konstantinos Avramidis

The pre-conceptual layout for an electron cyclotron system (ECS) in DEMO is described. The present DEMO ECS considers only equatorial ports for both plasma heating and neoclassical tearing mode (NTM) control. This differs from ITER, where four launchers in ...

2021

JET ILA full array and polychromatic operation

Paulo Giovane Paschoali Pereira Puglia

The JET ILA is an Ion Cyclotron Resonance Heating (ICRH) antenna composed of four resonant double loops (RDLs) arranged in a 2 toroidal by 2 poloidal compact array. It has been operated in a range of frequencies from 29 to 51 MHz, but mostly on half array. ...

2021

Inverse design of diffractive optical elements using step-transition perturbation approach

Toralf Scharf, Dong Cheon Kim

Diffractive optical elements are ultra-thin optical components required for a variety of applications because of their high design flexibility. We introduce a gradient-based optimization method based on a step-transition perturbation approach which is an e ...

WALTER DE GRUYTER GMBH2021

On the 5G Communications: Fractal-Shaped Antennas for PPDR Applications

Maria-Alexandra Paun

In this study, one method of using antennas based on fractals to cover few kinds of public protection and disaster relief (PPDR) communications was presented. Dedicated antenna forms, necessary for antenna design by 5G implementation, were enhanced to suit ...

WILEY-HINDAWI2021

Zero Index Metamaterial for High Gain Array

Tingyong Jiang

Many metamaterials, including metal wire grid, was invented to enhance the performance of the antenna in the last decade. A novel zero index metamaterial (ZIM), consisting of double metal layers with periodic circular perforation cells, was proposed and st ...

IEEE2020

Antennas for CubeSat Communication

Miroslav Veljovic

CubeSats are a type of small satellites (< 500 kg) that weigh several kilograms and consist of multiple Units (U) measuring 100 × 100 × 113.5 mm3. CubeSats emerged as a low-cost alternative to conventional large satellites, and have since demonstrated capa ...

EPFL2020

Two-Element Antenna-Active Phase Shifter Packaging at 77 GHz

Anja Skrivervik, Efe Öztürk

This work presents a low cost and wire-bonded active phase shifter chip to RF circuitry on PCB board packaging for implementing a two-element phased array antenna at 77 GHz. The 1.5 mm × 1.1 mm chip is embedded in RO3003 PCB board and its GSG ports are wir ...

IEEE2019

Stacked patch antenna and hybrid beamforming network for 5G picocell applications

Anja Skrivervik, Danelys Rodríguez Avila

This paper addresses the design of an antenna array for a portable picocell station with omnidirectional coverage. The proposed solution includes a stacked patch antenna as a single radiating element of the antenna array and a hybrid beamforming network. T ...

IEEE2019

Patch Antenna System for CubeSats in L band

Anja Skrivervik, Miroslav Veljovic

An L-band patch-antenna system for CubeSat applications is presented in this paper. The high-permittivity dielectric loading reduces the size of individual antennas to make them suitable for a CubeSat platform. Two circularly polarized patch antennas were ...

The European Association on Antennas and Propagation (EurAAP)2019

A Comparison of Three Feeding Networks for CubeSat L/S-dual-band Stacked-Patch Antennas

Anja Skrivervik, Miroslav Veljovic

The CubeSat nanosatellite standard puts strict limitations on the antenna volume, resulting in a low impedance and axial-ratio (AR) bandwidths of patch antennas. The AR of a circularly polarized patch antenna can be improved with the introduction of a dedi ...

IEEE2019

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

Engineered acoustic mismatch for anchor loss control in contour mode resonators

Luis Guillermo Villanueva Torrijo, Annalisa De Pastina, Andrea Lozzi

Improving the quality factor (Q) of electromechanical resonators is of paramount importance for different applications, ranging from RF filtering to sensing. In this paper, we present a modified fabrication process flow for contour mode resonators to simul ...

2019

Material and Electrical study of HfO2-Based Resistive Random Access Memories (ReRAMs)

Behnoush Attarimashalkoubeh

Resistive Random Access Memories (ReRAMs) have been researched intensively in the last past decades as a promising alternatives technology for the next-generation non-volatile memory (NVM) devices. ReRAMâ s excellent performance properties such as high sw ...

EPFL2019

A combined 32‐channel receive‐loops/8‐channel transmit‐dipoles coil array for whole‐brain MR imaging at 7T

Rolf Gruetter, Özlem Ipek, Jérémie Daniel Clément

Purpose Multichannel receive arrays provide high SNR and parallel‐imaging capabilities, while transmit‐only dipole arrays have been shown to achieve a large coverage of the whole‐brain including the cerebellum. The aim of this study was to develop and char ...

Wiley2019

Modeling and Analysis of a Direct Time-of-Flight Sensor Architecture for LiDAR Applications

Edoardo Charbon, Chunmin Zhang, Preethi Padmanabhan

Direct time-of-flight (DTOF) is a prominent depth sensing method in light detection and ranging (LiDAR) applications. Single-photon avalanche diode (SPAD) arrays integrated in DTOF sensors have demonstrated excellent ranging and 3D imaging capabilities, ma ...

2019