Publications associées à Coefficient de performance

The influence of splitter blades and meridional profiles on the performance of small-scale turbopumps for ORC applications; analysis, neural network modeling and optimization

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

This work presents the influence of splitters on the performance of small-scale turbopumps for organic Rankine cycle applications numerically. Different design parameters, such as impeller diameter at the outlet, number of blades, blade angle at the traili ...

2023

Plasmonic Nanofluids: Enhancing Photothermal Gradients toward Liquid Robots

Giulia Tagliabue, Matteo Bevione

In situ energy generation in soft, flexible, autonomous devices is challenging due to the need for highly stretchable and fault-resistant components. Nanofluids with pyro-, tribo-, or thermoelectric properties have recently emerged as promising solutions f ...

Amer Chemical Soc2023

Selection and Optimal Use of Nanoporous Materials for Adsorption Energy Technologies

Emanuele Piccoli

Due to the large waste of heat in the power and industrial sectors, our use of energy is inefficient. Moreover, it relies on rapidly depleting and greenhouse-gas-emitting sources such as fossil fuels. While the scarcity of energy resources is a relevant so ...

EPFL2023

Taking a step back from glass towers facades to make them compatible with the 2050 targets

Sergi Aguacil Moreno, Bernard Paule

Skyscrapers or glass towers are an extremely common model throughout the world. In the current context of climate change and resource depletion, we need to develop new postures towards these objects, especially for existing buildings that are becoming obso ...

2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Near-junction microfluidic cooling for high power-density GaN-on-Si electronics: A wafer, device, packaging, and system-level investigation

Remco Franciscus Peter van Erp

Electrification of the energy section, from generation to end-use, plays an essential role in reducing global CO2 emission. Innovations in power electronics are required to increase conversion efficiency and power density. Gallium nitride (GaN) transistors ...

EPFL2022

Bioinspired Soft Bendable Peristaltic Pump Exploiting Ballooning for High Volume Throughput

Josephine Anna Eleanor Hughes

Interest in bioinspired peristaltic pumps has grown in popularity among the scientific community in the last decade thanks to their extreme flexibility and their intrinsic compliance. In this paper, we propose a soft peristaltic pump exploiting ballooning. ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Variation in Indoor Thermal Environmental Parameters in an Open Space Office

Dolaana Khovalyg, Verena Marie Barthelmes, Arnab Chatterjee

Building energy modelling is an indispensable component of today’s design method. However, as per research findings, real-life buildings could utilize almost twice the amount of their ideal energy performance. Thus, it is important to understand the variat ...

TU Delft2022

Thermally reconfigurable metalens

Giulia Tagliabue, Anna Archetti, Nathanaël Restori, Fateme Kiani Shahvandi, Theodoros Tsoulos, Ren-Jie Lin

Reconfigurable metalenses are compact optical components composed by arrays of meta-atoms that offer unique opportunities for advanced optical systems, from microscopy to augmented reality platforms. Although poorly explored in the context of reconfigurabl ...

WALTER DE GRUYTER GMBH2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Non-evaporable getter pump operations in the TCV tokamak

Ambrogio Fasoli, Basil Duval, Stefano Coda, Yves Martin, Holger Reimerdes, Frédéric Dolizy, Marcelo Baquero Ruiz

A non-evaporable getter pump using the ZAO alloy was installed on TCV and operated during the 2019 experimental campaign. The pump performance, determined from in-situ pumping speed measurements, indicates that current getter pump technologies are well sui ...

2021

Compact Thermosyphon Cooling System For High Heat Flux Servers: Validation Of Thermosyphon Simulation Code Considering New Test Data

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

Passive, gravity-driven thermosyphons represent a stepchange in technology towards the goal of greatly reducing PUE (Power Usage Effectiveness) of datacenters by replacing energy hungry fans of air-cooling approach with a highly-reliable solution able to d ...

AMER SOC MECHANICAL ENGINEERS2021

Multiphase transport and evaporative cooling in fuel cell gas diffusion layers

Sarah van Rooij

The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat ...

EPFL2021

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Hybrid Two-Phase Cooling Technology For Next-Generation Servers: Thermal Performance Analysis

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

This paper advances the work presented at ITHERM 2020 where a novel passive two-phase technology was introduced for more efficient cooling of datacenters compared to air-based cooling solutions (e.g. In-Room, In-Row, etc.). The proposed hybrid two-phase co ...

IEEE2021

Climate change and energy performance of European residential building stocks-A comprehensive impact assessment using climate big data from the coordinated regional climate downscaling experiment

Kavan Javanroodi, Yuchen Yang, Vahid Moussavi Nik

In recent years, climate change and the corresponding expected extreme weather conditions have been widely recognized as potential problems. The building industry is taking various actions to achieve sustainable development, implement energy conservation s ...

2021

Domestic hot water optimizing potential in existing or renovated multifamily residential buildings

Flourentzos Flourentzou, Joshua Pereira

In a Swiss case study of the ReCO2st research project, hot water optimization demonstrated a high potential for energy savings with low investment costs. The optimization started with the end user to reduce first hot water consumption. Energy-efficient sho ...

IOP PUBLISHING LTD2021

Numerical investigation on the volute cutwater for pumps running in turbine mode

Elena Vagnoni, Alessandro Morabito

The hydropower sector has recently raised the interest in pump as turbine (PaT) that can be a valid trade-off between capital cost and performance in micro-scale installations. Nevertheless, the modest efficiency of PaTs often restricts their exploitation. ...

Pergamon-Elsevier Science Ltd2021

District heating and cooling systems to integrate renewable energy in urban areas

Francesca Belfiore

The building sector plays a crucial role in the ongoing energy transition due to its significant share of global energy consumption and carbon dioxide emissions, especially when combined with the estimation that 70% of the world's population will be living ...

EPFL2021

Energy renovation of the built heritage housing based on the living building challenge certification. Case study in Bresca (Spain)

Sergi Aguacil Moreno

In light of increasing sustainability requirements, one of the challenges related to the heritage building stock consists in finding a balance between preserving the existing architectural character and improving energy efficiency. The project presented in ...

2020