Publications associées à Jonction p-n

Theoretical explanation of passivation behavior in OFP-Cu and OF-Cu

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic pola ...

Pergamon-Elsevier Science Ltd2024

Polarization-enhanced GaN Schottky barrier diodes: Ultra-thin InGaN for high breakdown voltage and low Ron

Elison de Nazareth Matioli, Zheng Hao, Alessandro Floriduz

In this work, we present a concept that leverages the strong piezoelectric polarization field in InGaN, which counteracts the external electric field at reverse bias. We show that despite the smaller InGaN band-gap and lower critical electric field, its st ...

2024

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

Michael Graetzel, Jacques-Edouard Moser, Kai Zhu, Etienne Christophe Socie, George Cameron Fish, Aaron Tomas Terpstra

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

2024

Plasmonically enhanced molecular junctions for investigation of atomic-scale fluctuations in self-assembled monolayers

Sakthi Priya Amirtharaj

Molecular junctions represent a fascinating frontier in the realm of nanotechnology and are one of the smallest optoelectronic devices possible, consisting of individual molecules or a group of molecules that serve as the active element sandwiched between ...

EPFL2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Silicon CMOS and InGaAs(P)/InP SPADs for NIR/SWIR detection

Utku Karaca

Applications demanding imaging at low-light conditions at near-infrared (NIR) and short-wave infrared (SWIR) wavelengths, such as quantum information science, biophotonics, space imaging, and light detection and ranging (LiDAR), have accelerated the develo ...

EPFL2024

Time-resolved multi-gate ion sensitive field effect transducer and system and method of operating the same

Jean-Michel Sallese, Adil Koukab

A time-resolved multi-gate ion sensitive field effect transducer, including a silicon layer, a P-doped region in the silicon layer and a first electrode in electric connection with the P doped region, a N-doped region in the silicon layer and a second elec ...

2023

Surfactant behavior and limited incorporation of indium during in situ doping of GeSn grown by molecular beam epitaxy

Anna Fontcuberta i Morral, Andrea Giunto, Thomas Hagger, Louise Emma Webb

GeSn is a promising group-IV semiconductor material for on-chip Si photonics devices and high-mobility transistors. These devices require the use of doped GeSn regions, achieved preferably in situ during epitaxy. From the electronic valence point of view, ...

AMER PHYSICAL SOC2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Aïcha Hessler-Wyser, Franz-Josef Haug, Audrey Marie Isabelle Morisset, Sofia Libraro, Julien Hurni, Luca Massimiliano Antognini, Ezgi Genç

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

New ultrahigh-speed device concepts: from THz nanoplasma devices to glass-like electronics for neuromorphic computation

Mohammad Samizadeh Nikooytabalvandani

There is a never-ending push for electronic systems to provide faster operation speeds, higher energy efficiencies, and higher power capabilities at smaller scales. These requirements are apparent in different areas of electronics, from radiofrequency (RF) ...

EPFL2023

Disorder-induced bulk photovoltaic effect in a centrosymmetric van der Waals material

Andras Kis, Mukesh Kumar Tripathi, Zhe Sun, Juan Francisco Gonzalez Marin, Cheol Yeon Cheon

Sunlight is widely seen as one of the most abundant forms of renewable energy, with photovoltaic cells based on pn junctions being the most commonly used platform attempting to harness it. Unlike in conventional photovoltaic cells, the bulk photovoltaic ef ...

2023

Interface connection of functionalized carbon nanotubes for efficient and stable perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia, Ruiyuan Hu

The ionic defects of hetero-junction interfaces always attract and trap carriers via surface electrostatic forces, which are crucial for the efficiency and intrinsic stability of perovskite solar cells (PSCs). Herein, functionalized carbon nanotubes (CNTs) ...

Royal Society of Chemistry2023

Zn3P2 as an earth-abundant photovoltaic material: from growth to device

Rajrupa Paul

The development of cost-effective and earth-abundant semiconducting materials is imperative for the sustainable deployment of photovoltaic technology. Zinc phosphide (Zn3P2) is a promising candidate for terawatt-scale electricity generation. It has a near- ...

EPFL2023

The nanoscale impact of individual nonradiative point defects on InGaN/GaN quantum wells

Thomas Fjord Kjaersgaard Weatherley

Today's world depends on optoelectronic devices: light-emitting diodes illuminate our houses and backlight the displays on our gadgets, while laser diodes underpin fibre-optic communication. Such optoelectronic devices rely on crystalline semiconductor het ...

EPFL2023

Development of next-generation microfluidic systems for enhanced, faster, and cost-effective immunoassays for tissue diagnostics - Ac electrothermal flow & Acoustofluidics

Muaz Salama Abdelmonem Draz

The application of microfluidics in the field of surface-based assays and more specifically, the spatial molecular profiling of tumor tissues has gained a lot of interest, especially with the increased interest in personalized medicine and targeted therapy ...

EPFL2023

Electrical control of glass-like dynamics in vanadium dioxide for data storage and processing

Elison de Nazareth Matioli, Andras Kis, Andreas Schueler, Anna Krammer, Philip Johannes Walter Moll, Guilherme Migliato Marega, Reza Soleiman Zadeh Ardebili, Mohammad Samizadeh Nikooytabalvandani

Metal–oxide–semiconductor junctions are the building blocks of modern electronics and can provide a variety of functionalities, from memory to computing. The technology, however, faces constraints in terms of further miniaturization and compatibility with ...

2022

Tailoring electric dipole of hole-transporting material p-dopants for perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia, Yi Zhang, Nadja Isabelle Desiree Klipfel, Keith Gregory Brooks, Min Chen, Yu Shi

Li-TFSI/t-BP are the most widely employed p-dopants for hole-transporting materials (HTMs) within the state-of-the-art perovskite solar cells (PSCs). The hygroscopicity and migration of these dopants, however, lead to devices with limited stability. To sol ...

CELL PRESS2022

In Operando, Photovoltaic, and Microscopic Evaluation of Recombination Centers in Halide Perovskite-Based Solar Cells

Ulf Anders Hagfeldt, Henry Snaith, Silver Hamill Turren Cruz

The origin of the low densities of electrically active defects in Pb halide perovskite (HaP), a crucial factor for their use in photovoltaics, light emission, and radiation detection, remains a matter of discussion, in part because of the difficulty in det ...

AMER CHEMICAL SOC2022

Charge sensing properties ofmonolithic CMOS pixel sensors fabricated in a 65 nm technology

Francesco Piro

In this work the initial performance studies of the first small monolithic pixel sensors dedicated to charged particle detection, called CE-65, fabricated in the 65nm TowerJazz Panasonic Semiconductor Company are presented. The tested prototypes comprise m ...

ELSEVIER2022