Publications associées à Impedance bridging

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Impact of beam-coupling impedance on the Schottky spectrum of bunched beam

Tatiana Pieloni, Nicolas Frank Mounet, Christophe Emmanuel R. Lannoy

The Schottky monitors of the Large Hadron Collider (LHC) can be used for non-invasive beam diagnostics to estimate various bunch characteristics, such as tune, chromaticity, bunch profile or synchrotron frequency distribution. However, collective effects, ...

Iop Publishing Ltd2024

High Performance Low cost Transition Connectors for 5G mmWave Applications

Anja Skrivervik, Abolfazl Azari

Millimeter wave (mmWave) is an interesting research area in recent years. Transition connectors are key components of mmWave passive systems. The commercially available cable connectors are lossy and expensive in mmWave frequencies. In this paper, various ...

IEEE2022

Optimization of Edge Profile for Improved Anti-Resonance Quality Factor in Lithium Niobate SH0 Resonators

Luis Guillermo Villanueva Torrijo, Silvan Stettler

Thin-film lithium niobate (LNO) has been identified as a promising material platform for enabling high electromechanical coupling and low-loss piezoelectric resonators for filtering applications. In this work, the design and fabrication of fundamental shea ...

IEEE2022

Corona discharge actuator as an active sound absorber under normal and oblique incidence

Hervé Lissek, Stanislav Sergeev, Thomas Humbert

In the majority of active sound absorbing systems, a conventional electrodynamic loudspeaker is used as a controlled source. However, particular situations may require an actuator that is more resistant to harsh environments, adjustable in shape, and light ...

2022

A Cryogenic Broadband Sub-1-dB NF CMOS Low Noise Amplifier for Quantum Applications

Edoardo Charbon, Andrea Ruffino, Yatao Peng

A cryogenic broadband low noise amplifier (LNA) for quantum applications based on a standard 40-nm CMOS technology is reported. The LNA specifications are derived from the readout of semiconductor quantum bits at 4.2 K, whose quantum information signals ar ...

2021

A Closed Time-Reversal Cavity for Electromagnetic Waves in Transmission Line Networks

Mario Paolone, Farhad Rachidi-Haeri, Marcos Rubinstein, Zhaoyang Wang, Reza Razzaghi

A closed time-reversal (TR) cavity has been considered a purely theoretical concept whose experimental realization was assumed to be impossible. In this article, we demonstrate that it is, in fact, possible to realize a closed TR cavity using a network of ...

2021

Positional dependence of particles and cells in microfluidic electrical impedance flow cytometry: origin, challenges and opportunities

Philippe Renaud, Jonathan Bastien Cottet

Microfluidic electrical impedance flow cytometry is now a well-known and established method for single-cell analysis. Given the richness of the information provided by impedance measurements, this non-invasive and label-free approach can be used in a wide ...

2020

3D Smith chart constant quality factor semi-circles contours for positive and negative resistance circuits

Mihai Adrian Ionescu, Andrei Müller

The article firstly proves that the constant quality factor (Q) contours for passive circuits, while represented on a 2D Smith chart, form circle arcs on a coaxal circle family. Furthermore, these circle arcs represent semi-circles families in the north he ...

2020

Modeling and Design Optimization of Medium Frequency Transformers for Medium-Voltage High-Power Converters

Marko Mogorovic

Novel high-power medium-voltage converter technologies offering galvanic insulation are needed to support the development of the emerging medium-voltage direct-current grids and further improve the performance of various other applications such as traction ...

EPFL2019

On the Differential Input Impedance of an Electro-Explosive Device

In this paper, a model for the input impedance of a hot-wire electro-explosive device (EED) based on differential-mode measurements is proposed. The model represents the EED using three transmission line segments in cascade. The characteristics of each seg ...

Institute of Electrical and Electronics Engineers2018

Phase Corrected H-Plane Horn Antenna in Gap SIW Technology

Juan Ramon Mosig, Marc Esquius Morote, Lei Wang

This communication introduces a modified substrate integrated waveguide (SIW), the gap SIW, and deduces an approximate closed-form expression for calculating its effective width, taking into account the fringing and coupling fields around the gap. As an im ...

Ieee-Inst Electrical Electronics Engineers Inc2017

Design of active Multiple-degrees-of-freedom electroacoustic resonators for use as broadband sound absorbers

Hervé Lissek, Romain Boulandet, Etienne Thierry Jean-Luc Rivet, Sami Driss Karkar

We present a novel control method achieving stable multiple-degrees-of-freedom electroacoustic resonators. Such broadband absorbers, composed of a feedback-controlled electrodynamic loudspeaker, have many practical applications to real-world acoustic engin ...

2017

On the Optimisation of Multi-Degree-of-Freedom Acoustic Impedances of Low-Frequency Electroacoustic Absorbers for Room Modal Equalisation

Hervé Lissek, Etienne Thierry Jean-Luc Rivet, Sami Driss Karkar

Low-frequency electroacoustic absorbers have recently been developed as a solution for the modal equalisation. Firstly investigated in waveguides, the technique consists in matching the acoustic impedance at a closed-box loudspeaker diaphragm to the charac ...

2017

An Improved Formula for the Transfer Impedance of Two-Layer Braided Cable Shields

Farhad Rachidi-Haeri, Nicolas Mora Parra

In this letter, we propose a formula for evaluating the transfer impedance of two-layer braided cable shields. The proposed formula results from the combination of the model proposed by Vance for the evaluation of the equivalent transfer impedance of a two ...

Ieee-Inst Electrical Electronics Engineers Inc2015

Numerical Simulation of the Overall Transfer Impedance of Shielded Spacecraft Harness Cable Assemblies

Farhad Rachidi-Haeri, Nicolas Mora Parra

In this paper, we present general considerations for the application of the multiconductor transmission-line theory for simulating shielded spacecraft harness cable assemblies. Some of the practical issues that occur in the modeling process of various comp ...

Institute of Electrical and Electronics Engineers2015

Passive UHF RFID Systems for Capacitive Sensing Applications

Kerem Kapucu

In this work, a complete passive UHF RFID system for capacitive sensing applications is developed to be used in food quality monitoring and supply chain management. All the components of the RFID system including the base station, the base station antenna, ...

EPFL2015

Feeding structure influence on performance of two UWB antennas near a human arm

Anja Skrivervik, Mohsen Koohestani

This paper reports a study of the feeding structure influence on impedance matching and system fidelity factor of two loaded UWB antennas when placed near a human arm. To this aim, two identical dielectric loaded versions of the same UWB antenna designs wi ...

2014

Toward broadband electroacoustic resonators through optimized feedback control strategies

Hervé Lissek, Romain Boulandet

This paper presents a methodology for the design of broadband electroacoustic resonators for low-frequency room equalization. An electroacoustic resonator denotes a loudspeaker used as a membrane resonator, the acoustic impedance of which can be modified t ...

Elsevier2014

Analysis of resonant planar dissipative network antennas for rf inductively coupled plasma sources

Christoph Hollenstein, Alan Howling, Philippe Frédérique Bruno Guittienne

The analysis of a radio-frequency (RF) planar antenna is presented for applications in plasma processing. The antenna is a network of elementary meshes composed of inductive and capacitive elements which exhibits a set of resonant modes. The high currents ...

Iop Publishing Ltd2014