Publications associées à Calorimétrie

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

Iop Publishing Ltd2024

Melting pseudosymmetry and thermal expansion in 3-benzoylpropionic acid

Tomasz Poreba

The thermal behavior of 3-benzoylpropionic acid (BPA) was investigated using single-crystal and synchrotron powder X-diffraction, as well as differential scanning calorimetry analysis. The study revealed the existence of two subtly distinct structures of B ...

ROYAL SOC CHEMISTRY2023

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva, Shashank Bishnoi, Sreejith Krishnan

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

Measurement of WBG-based power supplies

Elison de Nazareth Matioli, Hongkeng Zhu, Armin Jafari

This paper discusses different measurement methods to evaluate the efficiency of WBG-based power supply solutions, including electrical measurement methods and their verification with calorimetric methods, and compares the performance of Si-based and GaN-b ...

IEEE2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Interlaboratory Test Program to Determine the Precision of the R3 Test Method (ASTM C1897-20) for Measuring Reactivity of Supplementary Cementitious Materials

Karen Scrivener, Ruben Anton Snellings, Diana Londoño Zuluaga

The substitution of portland clinker by supplementary cementitious materials (SCMs) is one of the main avenues for the further decarbonization of cement production. To secure future SCM supplies, generic and performance-related test methods for SCMs are re ...

AMER SOC TESTING MATERIALS2022

Second harmonic scattering of water in a biological context

Tereza Schönfeldová

Water is one of the most abundant molecules in the universe. It forms a hydrogen bond network with unique structure and dynamics. Hydrogen bonding is highly relevant to many biological processes including membrane formation, protein folding, adsorption, an ...

EPFL2022

Promoting Persistent Superionic Conductivity in Sodium Monocarba-closo-dodecaborate NaCB11H12 via Confinement within Nanoporous Silica

Mirjana Dimitrievska

Superionic phases of bulk anhydrous salts based on large cluster-like polyhedral (carba)borate anions are generally stable only well above room temperature, rendering them unsuitable as solid-state electrolytes in energy-storage devices that typically oper ...

AMER CHEMICAL SOC2021

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel, Lu Jiang

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Microchannel-based Calorimeter for Rapid and Accurate Loss Measurements on High-efficiency Power Converters

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Palliyage Srilak Nirmana Perera

The difficulty in accurately measuring losses in high-frequency power converters hinders accurate breakdown of losses which is essential for device and circuit optimization. Electrical methods are often not adequate and calorimetric approaches found in the ...

IEEE2021

Extraction of Rare Earth Metals: The New Thermodynamic Considerations Toward Process Hydrometallurgy

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Andrea Testino, Ajay Bhagwan Patil

Successful management of secondary waste resources is essential for the viable circular economy. E-waste could serve as the potential urban mining source for the alternative supply chain of critical metals such as rare earth elements (REEs). The hydrometal ...

Springer Nature Switzerland AG2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

The major challenge to overcome when processing metallic glasses (MGs) is to avoid crystallization. Therefore, time-temperature-transformation (TTT) diagrams are used, but they are often derived from experiments in which heating or cooling rates are limite ...

2021

Effects of Ball Milling and TiF3 Addition on the Dehydrogenation Temperature of Ca(BH4)2 Polymorphs

Andreas Züttel

The changes introduced by both ball milling and the addition of small amounts of TiF3 in the kinetics of the hydrogen desorption of three different Ca(BH4)2 polymorphs (α, β and γ) have been systematically investigated. The samples with different polymorph ...

2020

Structural and Dynamical Properties of Potassium Dodecahydro-monocarba-closo-dodecaborate: KCB11H12

Mirjana Dimitrievska, Wei Zhou

MCB11H12 (M: Li, Na) dodecahydro-monocarba-closo-dodecaborate salt compounds are known to have stellar superionic Li+ and Na+ conductivities in their high-temperature disordered phases, making them potentially appealing electrolytes in all-solid-state batt ...

AMER CHEMICAL SOC2020

N2O Decomposition over Fe-ZSM-5: A Systematic Study in the Generation of Active Sites

Lioubov Kiwi, Bryan Bromley, Fernando Cardenas Lizana

We have carried out a systematic investigation of the critical activation parameters (i.e., final temperature (673-1273 K), atmosphere (He vs. O-2/He), and final isothermal hold (1 min-15 h) on the generation of "alpha-sites", responsible for the direct N2 ...

2020

Hydration development and thermal performance of calcium sulphoaluminate cements containing microencapsulated phase change materials

Diana Londoño Zuluaga

Microencapsulated phase change materials (MPCM) incorporated in buildings walls can reduce indoor temperature fluctuations, conserving energy and enhancing thermal comfort. MPCM were incorporated in calcium sulphoaluminate cement (CSA) at high concentratio ...

Pergamon-Elsevier Science Ltd2020

Rapid, Robust, and Relevant (R3) Reactivity Test for Supplementary Cementitious Materials

Karen Scrivener, Ruben Anton Snellings, François Henri Avet, Xuerun Li

Although supplementary cementitious materials (SCMs) are now commonly accepted and widely used, consensus has not been reached for methods to test their chemical reactivity. A multitude of test methods exist but often fall short on one or more of the key f ...

AMER CONCRETE INST2019

Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites

John Christopher Plummer, Nicolas Candau, Oguzhan Oguz, Stéphane Henri Florian Bernhard

Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt % (4.4 vol %) in order to investig ...

2019

One-dimensional facile growth of MAPbI(3) perovskite micro-rods

Mohammad Khaja Nazeeruddin, Zubair Ahmad

One-dimensional microrods (4-5 mm) of PbI2 and CH3NH3PbI3 (MAPbI(3)) with unique structural and morphological properties have been grown at room temperature. X-ray diffraction (XRD) patterns of both types of micro-rods exhibit a hexagonal system (P3m1(164) ...

2019