Publications associées à Ferrite core

Modeling and optimization of PCB coils for inductive power transfer systems

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

An Implantable Inductive Sensor for Direct and Continuous Monitoring of the Pulmonary Artery Cross-Sectional Area

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents a novel method for the measure of the cross-sectional area (CSA) of an artery to be used for the direct and continuous (24/7) monitoring of cardiac output (CO). The method is based on the inductance change of an anchoring loop mounted o ...

IEEE2022

Thermally-Compensated Magnetic Core Loss Model for Time-Domain Simulations of Electrical Circuits

Drazen Dujic, Min Luo, Nikolina Djekanovic

This paper introduces a thermally-compensated magnetic hysteresis model, capable of accurately determining core losses of ferrite materials while accounting for core temperature variations. The employed model is based on permeance-capacitance analogy and i ...

2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

97.4%-Efficient All-GaN Dual-Active-Bridge Converter with High Step-up High-Frequency Matrix Transformer

Elison de Nazareth Matioli, Armin Jafari, Palliyage Srilak Nirmana Perera, Mohammad Samizadeh Nikooytabalvandani

In this work, we demonstrate a state-of-the-art high step-up/down dual-active-bridge (DAB) converter designed with GaN transistors, to achieve a high efficiency and large power-density. A quasi-planar matrix transformer with high step-up/down ratio is demo ...

2020

Integrated Simulation Approach to Loss Calculations of Power Converter Systems

Drazen Dujic, Min Luo, Nikolina Djekanovic

There is a strong need in the power electronics community to have design tools capable of performing simultaneous simulations in different domains, e.g. electric, magnetic, dielectric and thermal. Therefore, this paper presents an approach to the calculati ...

2020

Breaking of Internal Waves and Turbulent Dissipation in an Anticyclonic Mode Water Eddy

Bieito Fernandez Castro

A four-month glider mission was analyzed to assess turbulent dissipation in an anticyclonic eddy at the western boundary of the subtropical North Atlantic. The eddy (radius ≈ 60 km) had a core of low potential vorticity between 100–450 m, with maximum radi ...

2020

Dynamic Modeling of Magnetic Components for Circuit Simulation of Power Electronic Systems

Min Luo

Magnetic components play an important role in a power electronic converter system. They provide energy buffering, galvanic isolation and voltage ratio conversion and have significant impact on the overall performance of the system regarding power efficienc ...

EPFL2018

Study and Characterization of Magnetic Materials for Beam Intensity Monitors at CERN

Silvia Aguilera Murciano

The number of particles in the beams used at CERN is measured by a family of devices called the Beam Current Transformers (BCTs). One of such devices is the DC Current Transformer (DCCT) measuring the total number of particles in an accelerator. The DCCT i ...

EPFL2018

Building Composite Iron-Manganese Oxide Flowerlike Nanostructures: A Detailed Magnetic Study

Davide Deiana

Here we show that it is possible to produce different magnetic core multiple shell heterostructures from monodisperse Fe3O4 spherical magnetic seeds by finely controlling the amount of a manganese precursor and using, in a smart and simple way, a cation-ex ...

Amer Chemical Soc2017

Modelling Hysteresis of Soft Core Materials using Permeance-Capacitance Analogy for Transient Circuit Simulations

Drazen Dujic, Min Luo, Jost Allmeling

Magnetic components using soft core materials are widely used in power electronic converters. The hysteresis effect of the material leads to power loss and harmonic distortion. If this effect can be modelled in system-level time-domain simulation, the perf ...

Ieee2017

Study and characterization of soft magnetic materials for beam intensity monitors at CERN

Heinrich Hofmann, Silvia Aguilera Murciano

At CERN, the circulating beam current measurement is provided by two types of transformers, the DC Current Transformer (DCCT) and the Fast Beam Current Transformer (FBCT). Each transformer is built based on toroidal cores made from a magnetic material. Dep ...

Iop Publishing Ltd2017

Cyanide Single-Molecule Magnets Exhibiting Solvent Dependent Reversible "On" and "Off" Exchange Bias Behavior

Jan Gui-Hyon Dreiser

The syntheses, structures, and magnetic properties of four new complex salts, (PPN){Mn-III(salphen)(MeOH)[M-III(CN)(6)]} 7MeOH (Mn2M 7MeOH) (M = Fe, Ru, Os and Co; PPN+ = bis(triphenylphosphoranylidene)ammonium cation; H2salphen = N,N'-bis(salicyliden ...

American Chemical Society2015

Self-Assembly of a 3d-5f Trinuclear Single-Molecule Magnet from a Pentavalent Uranyl Complex

Marinella Mazzanti, Lucile Sylvie Danielle Chatelain

Mixed-metal uranium compounds are very attractive candidates in the design of single-molecule magnets (SMMs), but only one 3d-5f hetero-polymetallic SMM containing a uranium center is known. Herein, we report two trimeric heterodimetallic 3d-5f complexes s ...

Wiley-VCH Verlag GmbH2014

Electromagnetic Analysis and Validation of an Ironless Inductive Position Sensor

Yves Perriard, Alessandro Danisi, Alessandro Masi

The ironless inductive position sensor is a linear position sensing structure, which exhibits intrinsic immunity to external magnetic fields since it is characterized by air-cored windings. This new solution may be of major interest for applications where ...

Institute of Electrical and Electronics Engineers2013

Magnetic Model of the CERN Proton Synchrotron

Mariusz Juchno

In this thesis, we present development of the first magnetic model of the main Proton Synchrotron magnets. The operation of the machine and conducting research on increasing its performance require a significant amount of the magnetic field data for the op ...

EPFL2013

Sizing of branch inductors parameters in modular multilevel converters: An analytical approach

Alfred Rufer, Michail Vasiladiotis, Nicolas Cherix

One of the key features of Modular Multilevel Converters is the existence of inductors inside the branches that constitute each of their phases. These inductors, which may be coupled or non-coupled, authorize a certain independency in the control of the br ...

2013

Modeling of Inductive Contactless Energy Transfer Systems

Pascal Meyer

In the domain of electronic devices and especially desktop peripherals, there is an industrial trend which consists in removing the cables that pollute our domestic and professional environments. In this sense, wireless communication protocols are already ...

EPFL2012

Power Distribution Solutions for Large Hadron Collider Upgrades

Stefano Michelis

In view of the Large Hadrons Collider experiments upgrade, where the inner front-end electronics will require higher supply power, a new power distribution scheme has to be designed. This thesis presents a new and more efficient scheme based on step-down D ...

EPFL2012