Publications associées à Fretting corrosion between bone and calcium phosphate-calcium titanate coatings

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Farzaneh Talebkeikhah

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

EPFL2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Anna Neus Igual Muñoz, Brigitte Jolles-Haeberli

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

A guide to preclinical evaluation of hydrogel-based devices for treatment of cartilage lesions

Dominique Pioletti, Peyman Karami, Theofanis Stampoultzis, Yanheng Guo

The drive to develop cartilage implants for the treatment of major defects in the musculoskeletal sys-tem has resulted in a major research thrust towards developing biomaterial devices for cartilage repair. Investigational devices for the restoration of ar ...

ELSEVIER SCI LTD2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Revealing the complexity of ultra-soft hydrogel re-swelling inside the brain

Stéphanie Lacour, Michael Shur, John Martin Kolinski, Outman Akouissi, Olivier Didier Christian Rizzo

The brain is an ultra-soft viscoelastic matrix. Sub-kPa hydrogels match the brain's mechanical properties but are challenging to manipulate in an implantable format. We propose a simple fabrication and processing sequence, consisting of de-hydration, patte ...

2023

Raman microspectroscopy reveals unsaturation heterogeneity at the lipid droplet level and validates an in vitro model of bone marrow adipocyte subtypes

Olaia Maria Naveiras Torres-Quiroga, Vasco Ledebur de Antas de Campos, Josefine Catharina Pedersen Tratwal, Daniel Naveed Tavakol, Charles Christopher Bataclan

Bone marrow adipocytes (BMAds) constitute the most abundant stromal component of adult human bone marrow. Two subtypes of BMAds have been described, the more labile regulated adipocytes (rBMAds) and the more stable constitutive adipocytes (cBMAds), which d ...

FRONTIERS MEDIA SA2022

Mechanical reinforcement of granular hydrogels

Alvaro Lino Boris Charlet, Esther Amstad, Francesca Bono

Granular hydrogels are composed of hydrogel-based microparticles, so-called microgels, that are densely packed to form an ink that can be 3D printed, injected or cast into macroscopic structures. They are frequently used as tissue engineering scaffolds bec ...

ROYAL SOC CHEMISTRY2022

Age- and sex-specific normative values of bone mineral density in the adult glenoid

Dominique Pioletti, Alexandre Terrier, Philippe Büchler, Alain Farron, Frédéric Vauclair, Patrick Goetti

The objective of this study was to determine the normative bone mineral density (BMD) of cortical and trabecular bone regions in the adult glenoid and its dependence on the subject's age and sex. We analyzed computed tomography (CT) scans of 441 shoulders ...

WILEY2022

Overcorrected Implants for Total Shoulder Arthroplasty

Yasmine Boulanaache

Glenohumeral osteoarthritis is a degenerative shoulder joint disease, which causes the breakdown of articular cartilage and bone. People affected by this disease suffer from severe pain and eventually reduced mobility and poor life quality. This disease is ...

EPFL2021

A comparative surface analysis of explanted hip joint prostheses made of different biomedical alloys

Stefano Mischler, Angela Bermudez Castañeda, Adriana Esguerra Arce, Johanna Esguerra Arce

The introduction of modular design in total hip arthroplasty has enabled the use of different materials in one single configuration and the adjustment of the prosthesis to the patient's body, and facilitated medical revisions. However, modularity leads to ...

IMPRENTA UNIV ANTIOQUIA2021

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Advantages of patient-specific cutting guides with disposable instrumentation in total knee arthroplasty: a case control study

Brigitte Jolles-Haeberli

BackgroundTotal knee arthroplasty (TKA) is most frequently planned using conventional two-dimensional weight-bearing lower limb radiographs and is performed with conventional femoral and tibial cutting guides. Questions have been raised about the accuracy ...

BMC2021

Atomistic simulation and electron microscopy to characterize grain boundaries in doped beta-tricalcium phosphate ceramics

Gabrielle Anne Laguisma Sblendorio

The limitations and potential complications correlated with autogenous bone grafts have raised interest in the development of synthetic bone graft substitutes. ß-tricalcium phosphate (ß-TCP) is one of the most promising materials for synthetic bone graft s ...

EPFL2021

Microtensile failure mechanisms in lamellar bone: Influence of fibrillar orientation, specimen size and hydration

Johann Michler, Daniele Casari, Tatiana Kochetkova

A mechanistic understanding of bone fracture is indispensable for developing improved fracture risk assessment in clinics. Since bone is a hierarchically structured material, gaining such knowledge requires analysis at multiple length scales. Here, the ten ...

ELSEVIER SCI LTD2021

Modeling Current Transients in a Reciprocal Motion Tribocorrosion Experiment

Stefano Mischler, Anna Neus Igual Muñoz, Shoufan Cao

Tribocorrosion of passivating metals is a dynamic phenomenon causing degradation of materials by a combination of mechanical wear and electrochemical dissolution. The mechanical action typically produces a local removal of particles, metal as well as oxide ...

ELECTROCHEMICAL SOC INC2021

Laser-induced liquid micro-jets for drug delivery

Jan Krizek

Jet injection devices have been studied and developed for transdermal drug delivery to avoid the use of needles. Such contact-less devices provide several advantages such as better dose control, lateral and depth localisation, lower collateral damage than ...

EPFL2021

Synthesis and characterizations of biocompatible polymers and carbon nanotubes-based hybrids for biomedical applications

Lakshmi Devi Chakkarapani

The outstanding physico-chemical properties of carbon nanotubes (CNTs) applied to rectify the problems in bone tissue engineering through enhancing cell proliferation, adhesion and viability, which lead to the improvement in bone replacement, growth and he ...

2020