Publications associées à Low distortion switched-capacitor event-driven analog to digital converter

Emulating Multimemristive Behavior of Silicon Nanowire-Based Biosensors by Using CMOS-Based Implementations

Sandro Carrara, Junrui Chen, Kapil Bhardwaj

The research presented in this article draws inspiration from previous efforts aimed at replicating the functions of various solid-state memristors using a variety of materials. The memristor circuit emulator serves as a cost-effective tool for circuit des ...

Ieee-Inst Electrical Electronics Engineers Inc2024

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

Kyojin Choo

This work presents an acoustic analog front-end based on a delta sigma-modulated sample and average common-mode feedback technique. The proposed feedback offers a process and temperature stable high pass (HP) frequency corner, unity dc feedback gain, and a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Franco Maloberti, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Blumino: The First Fully Integrated Analog SiPM With On-Chip Time Conversion

Edoardo Charbon, Andrei Ardelean, Andrada Alexandra Muntean, Esteban Venialgo Araujo, Emanuele Ripiccini

Blumino is the first analog silicon photomultiplier with integrated amplifier, comparator and time-to-digital converter (TDC). The combination of a photodetector together with on-chip readout circuitry enables system-level advantages, such as internal para ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

An AC-Coupled Wideband Neural Recording Front-End With Sub-1 mm2×fJ/conv-step Efficiency and 0.97 NEF

Yusuf Leblebici, Volkan Cevher, Arda Uran

This letter presents an energy-and-area-efficient ac-coupled front-end for the multichannel recording of wideband neural signals. The proposed unit conditions local held and action potentials using an inverter-based capacitively coupled low-noise amplifier ...

2020

On the effect of linear feedback and parametric pumping on a resonator's frequency stability

Luis Guillermo Villanueva Torrijo

Resonant sensors based on micro- and nano-electro mechanical systems (M/NEMS) are ubiquitous in many sensing applications due to their outstanding performance capabilities, which are directly proportional to the quality factor (Q) of the devices. We addres ...

2020

Analysis of Large-Signal Output Capacitance of Transistors using Sawyer–Tower Circuit

Elison de Nazareth Matioli, Jessy Anthony Ançay, Armin Jafari, Palliyage Srilak Nirmana Perera, Georgios Kampitsis, Remco Franciscus Peter van Erp

A detailed analysis on the Sawyer–Tower method used in the measurement of large-signal output capacitance (Co) of power transistors is presented, followed by important design recommendations to obtain accurate results. Key factors affecting the proper impl ...

2020

Response of noise-amplifier flows: From linear control to nonlinear jet breakup

Isha Shukla

Among hydrodynamically unstable flows, the amplifier-flows are characterized by their large amplification potential in presence of external noise. Since amplifiers do not have an intrinsic dynamics, a chosen forcing can be applied to eventually control the ...

EPFL2019

A CMOS Analog Front-End for Implantable Pulmonary Artery Pressure Monitoring System

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient analog front-end circuit to monitor the pulmonary artery pressure (PAP) with piezoresistive pressure sensors. A low-power capacitively-coupled instrumentation amplifier (CCIA) is developed in order to boost the ampli ...

IEEE2019

High Speed SAR ADC Architectures in 28nm FDSOI CMOS

Mustafa Kilic

The demand on high speed Analog to Digital Converters (ADCs) has increased considerably the last years. From communications circuit to high speed oscilloscopes, Giga Samples per second (GS/s) ADCs are requested. With the scaling of the CMOS technology, des ...

EPFL2019

On-Chip High-Voltage Sensors Based on Trap-Assisted 2DEG Channel Control

Elison de Nazareth Matioli, Armin Jafari

In this work, we present a new device concept for compact high-voltage sensing with high-impedance input port, consisting of an AlGaN/GaN high-electron-mobility channel controlled by trapped carriers generated by a metallic electrode. The high-voltage appl ...

Institute of Electrical and Electronics Engineers2019

Quantum-Limited Directional Amplifiers with Optomechanics

Tobias Kippenberg, Nathan Rafaël Bernier, László Dániel Tóth

Directional amplifiers are an important resource in quantum-information processing, as they protect sensitive quantum systems from excess noise. Here, we propose an implementation of phase-preserving and phase-sensitive directional amplifiers for microwave ...

2018

A 10b SAR ADC with Widely Scalable Sampling Rate and AGC Amplifier Front-End

Yusuf Leblebici, Seyed Armin Tajalli, Ayça Akkaya, Firat Çelik

This paper presents a low power successive approximation register (SAR) ADC and its front-end automatic gain control (AGC) amplifier designed in 65nm CMOS technology. Digitally controlled variable gain amplifier (VGA) in AGC loop is used to maximize the dy ...

IEEE2018

Electronics Emulation for Real-Time Fault Location in Power Systems

François Pierre Gaugaz

This research presents a high-speed hardware platform dedicated to emulate electrical power networks for the fault location. The solution implements an algorithm based on the Electromagnetic Time-Reversal (EMTR) principle, which allows locating faults in v ...

EPFL2017

184 mu W ultrasonic on-off keying/amplitude-shift keying demodulator for downlink communication in deep implanted medical devices

Catherine Dehollain, Francesco Mazzilli

An ultrasonic on-off keying/amplitude-shift keying demodulator using standard 0.18 mu m CMOS technology is proposed, intended for recovering the identification number of an implanted medical device transmitted from an external base station. The CMOS integr ...

Institution of Engineering and Technology2016

CMOS ASIC Design of Multi-frequency Multi-constellation GNSS Front-ends

Saeed Ghamari

With the emergence of the new global navigation satellite systems (GNSSs) such as Galileo, COMPASS and GLONASS, the US Global Positioning System (GPS) has new competitors. This multiplicity of constellations will offer new services and a much better satell ...

EPFL2016

Design and Implementation of a 46-kS/s CMOS SC Dual-Mode Capacitive Sensor Interface With 50-dB SNR and 0.7% Nonlinearity

Catherine Dehollain, Shenjie Wang

This paper presents the design and implementation of a 46-kS/s CMOS switch-capacitor dual-mode capacitive sensor interface circuit for inkjet-printed capacitive humidity sensors. The specifications of the interface circuit, which includes a capacitance-to- ...

Institute of Electrical and Electronics Engineers2015

Design Methodology for Common-Mode Stability of OTA-based Gyrators

Pierre-André Farine, Cyril Botteron, Saeed Ghamari, Gabriele Tasselli

This paper presents a design methodology for common-mode (CM) stability of operational transconductance ampliﬁer (OTA)-based gyrators. The topology of gm−C active inductors is brieﬂy reviewed. Subsequently, a comprehensive mathematical analysis on the CM s ...

Wiley2016

Design Methodology for Controlled-Q Resonators in OTA-based Filters

Pierre-André Farine, Cyril Botteron, Saeed Ghamari, Gabriele Tasselli

This paper presents a design methodology for high quality factor resonators based on operational transconductance amplifier (OTA) employed in active filters. The quality factor of a resonator, as its main specification, is translated to the requirements of ...

IEEE2015

Simple thermal noise estimation of OTA-based switched-capacitor filters

Christian Enz, François Krummenacher, Assim Boukhayma

This paper presents a new analytical method to simply estimate the integrated thermal noise in switched-capacitor filters (SCF). It is shown how the Bode theorem, which is theoretically valid only for continuous-time passive filters, can be extended to als ...

2015