Publication

Volumetric Additive Manufactuing of Ceramics

Publications associées (26)

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Spark Plasma Sintering of Ceramics: From Modeling to Practice

Paul Bowen, Michael Stuer, Zhe Zhao

Summarizing the work of nearly a decade of research on spark plasma sintering (SPS), a review is given on the specificities and key factors to be considered in SPS of ceramic materials, based on the authors’ own research. Alumina is used primarily as a mod ...

2020

Ni-Al2O3 nacre-like composites through hot-pressing of freeze-cast foams

A multi-step process is developed to create a nacre-like ceramic/metal composite. First, a slurry of Ni-coated alumina platelets and NiO nano-particles is directionally freeze-cast and the ice is sublimed, creating a foam with aligned lamellar walls contai ...

2019

Structural and microstructural studies on SiC-SiO2 ceramic composites

Ho-Yun Lee

In this study, SiC ceramic substrates were prepared with 99.5% silicon carbide powders which were came from waste silicon mud during the manufacturing process of solar cells. It is found that a SiO2 layer with 50 nm in thickness is present on the SiC surfa ...

2019

Recent Advances in Resonant Waveguide Gratings

Olivier Martin, Benjamin Gallinet, Guillaume Basset, Giorgio Quaranta

Resonant waveguide gratings (RWGs), also known as guided mode resonant (GMR) gratings or waveguide-mode resonant gratings, are dielectric structures where these resonant diffractive elements benefit from lateral leaky guided modes from UV to microwave freq ...

2018

CsPbBr3 QD/AlOx inorganic nanocomposites with exceptional stability in water, light and heat

Duncan Thomas Lindsay Alexander, Emad Oveisi, Seryio Saris, Raffaella Buonsanti, Anna Loiudice

Herein, the assembly of CsPbBr3 QD/AlOx inorganic nanocomposites, by using atomic layer deposition (ALD) for the growth of the amorphous alumina matrix (AlOx), is described as a novel protection scheme for such QDs. The nucleation and growth of AlOx on the ...

2017

Experimental verification of the method for producing a three-dimensional cross-pairs metamaterial structure based on a dielectric AlN cube

Przemyslaw Andrzej Gorski

This paper presents a method of manufacturing 3D metamaterial structures using laser radiation. Our proposed material, aluminum nitride (AlN), by interaction of a high-energy laser beam undergoes a direct metallization process, a result of which a conducti ...

Iop Publishing Ltd2016

Surface 3D Micro Free Forms: Multifunctional Microstructured Mesoporous alpha-Alumina by in Situ Slip Casting Using Excimer Laser Ablated Polycarbonate Molds

Paul Bowen, Patrik Willi Hoffmann, Sriharitha Rowthu

Ceramic surface microstructuring is a rapidly growing field with a variety of applications in tribology, wetting, biology, and so on. However, there are limitations to large-area microstructuring and fabrication of three-dimensional (3D) micro free forms. ...

Amer Chemical Soc2015

Effect of interfacial interactions on the electromechanical response of poly(vinylidene fluoride-trifluoroethylene)/BaTiO3 composites and its time dependence after poling

Dragan Damjanovic, Yves Leterrier, Véronique Michaud, Sara Dalle Vacche

Solvent cast and compression molded composite films based on poly(vinylidene fluoride-trifluoroethylene), containing pristine and silylated BaTiO3 particles, were poled, and their electromechanical response (d(33)), their dielectric properties, and the cry ...

Elsevier2015

Toward Knowledge-Based Grain-Boundary Engineering of Transparent Alumina Combining Advanced TEM and Atomistic Modeling

Paul Bowen, Marco Cantoni, Michael Stuer, Cécile Hébert, Abhishek Tewari, Farhang Nabiei

Transition element dopants (e.g., Y, La) are commonly used as sintering aids in polycrystalline alumina ceramics, which segregate to the grain boundaries and control the grain-boundary mobility. However, due to the extremely thin (

Wiley-Blackwell2015

Segregation of anion (Cl−) impurities at transparent polycrystalline α-alumina interfaces

Paul Bowen, Marco Cantoni, Cécile Hébert, Abhishek Tewari, Farhang Nabiei

Small amounts of anion impurities (e.g. Cl), which are incorporated during the synthesis of ceramic powders, can affect the properties and microstructure of the final sintered ceramic. The effect of anion impurities is a little studied and poorly understoo ...

Elsevier Sci Ltd2014

Fabrication and Test of High-Temperature Ceramic Transformer

Thomas Maeder, Peter Ryser, Conor Joseph Slater

This work describes the fabrication and test of a high temperature (+200°C) capable high frequency transformer. It was manufactured using Low Temperature Co-fired Ceramic (LTCC) technology, which allowed the complex multilayer structure of ceramic and meta ...

2014

Breaking of the macroscopic centric symmetry in Ba₁₋xSrxTiO₃ ceramics and single crystals

Alberto Biancoli

Beyond the possibility of finding a lead-free piezoceramics as replacement for PZT, the world-wide research has focused on other mechanisms of electro-mechanical coupling alternative to piezoelectricity, such as electrostriction and, more recently, flexoel ...

EPFL2014

Performance of ceramic anvils for high pressure neutron scattering

Livia Eleonora Bove Kado

Three kinds of ceramics, zirconia-toughened alumina (ZTA), alumina-toughened zirconia (ATZ) and yttria-stabilized zirconia (YSZ), were tested as anvil materials, mainly for the purpose of neutron scattering study under high pressure. ZTA with non-toroidal ...

Taylor & Francis Ltd2014

Colloidal Processing and Yield Stress Modeling Towards Dry Pressed Green Bodies for Transparent Polycrystalline Alumina

Paul Bowen, Michael Stuer

Colloidal processing is a key aspect in modern ceramic processing but most formulations are found empirically. The need for a better knowledge based design of suspension formulation can be achieved by using interparticle potential modelling linked to rheol ...

Wiley-Blackwell2014

Effect of silane coupling agent on the morphology, structure, and properties of poly(vinylidene fluoride-trifluoroethylene)/BaTiO3 composites

Dragan Damjanovic, Yves Leterrier, Véronique Michaud, Sara Dalle Vacche

Micron- and submicron-sized barium titanate (BaTiO3) particles, untreated and surface modified with aminopropyl triethoxy silane, were incorporated in poly(vinylidene fluoride-trifluoroethylene) to fabricate composites with up to 60 vol% of ceramic phase. ...

Springer Verlag2014

High Piezoelectric Longitudinal Coefficients in Sol-gel PZT Thin Film Multilayers

Paul Muralt, Silviu Cosmin Sandu, Alex Dommann, Nachiappan Chidambaram, Andrea Mazzalai, Antonia Neels, Davide Balma

A five-layer stack of lead zirconate titanate (PZT) thin films with Pt electrodes was fabricated for potential applications in nanoactuator systems. The 1 mu m thick PZT films were deposited by a sol-gel technique, the platinum electrodes by sputtering. Th ...

Wiley-Blackwell2014

On Micro Optical Elements for Efficient Light Diffusion

Roland Andreas Bitterli

Efficient light management is one of the key issues in modern energy conversion systems, be it to collect optical power or to redistribute light generated by high power light emitters. This thesis touches mainly on the subject of efficient light redistribu ...

EPFL2013

Atomistic Modeling of Processing Issues for Transparent Polycrystalline Alumina

Abhishek Tewari

Transparent polycrystalline alumina has many possible promising areas of application from jewelry and the watch industry to wave guides, energy economical lamp envelopes, and optical windows. Ultrahigh density, submicron sized grains and/or oriented micros ...

EPFL2013