Publications associées à Protective relay

Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview

With the increase in penetration of power electronic converters in the power systems, a demand for overcurrent/ overloading capability has risen for the fault clearance duration. This article gives an overview of the limiting factors and the recent technol ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

2023

Vacuum Circuit Breaker Closing Time Key Moments Detection via Vibration Monitoring: A Run-to-Failure Study

Olga Fink, Gaëtan Michel Frusque

Circuit breakers (CBs) play an important role in modern society because they make the power transmission and distribution systems reliable and resilient. Therefore, it is important to maintain their reliability and to monitor their operation. A key to ensu ...

2022

An Effective EMTR-Based High-Impedance Fault Location Method for Transmission Lines

Farhad Rachidi-Haeri, Rong Zeng

This article summarizes the electromagnetic time-reversal (EMTR) technique for fault location, and further numerically validates its effectiveness when the fault impedance is negligible. In addition, a specific EMTR model considering the fault impedance is ...

2021

Robotic Elytra: Insect-Inspired Protective Wings for Resilient and Multi-Modal Drones

Dario Floreano, Charalampos Vourtsis, William John Stewart

Winged drones that fly in close proximity to obstacles or that are capable of aerial and terrestrial locomotion can benefit from protective systems that prevent damage to delicate aerial structures. Existing protective solutions focus on multi-copter drone ...

2021

Three-Dimensional FDTD-Based Simulation of Induced Surges in Secondary Circuits Owing to Primary-Circuit Surges in Substations

Farhad Rachidi-Haeri, Marcos Rubinstein, Akiyoshi Tatematsu

Currently, plenty of sensitive electronic devices are installed in secondary circuits in substations and power plants. Electronic devices may malfunction and become damaged owing to electromagnetic disturbances caused mainly by lightning surges. To protect ...

2021

Field-to-Transmission Line Coupling Models With Special Attention to the Cooray–Rubinstein Approximation

Marcos Rubinstein

There are three equivalent procedures to evaluate the voltages induced by lightning on power lines, namely, the Agrawal–Price–Gurbaxani model, the Taylor–Satterwhite–Harrison model, and the Rachidi model. The Cooray–Rubinstein approximation is a procedure ...

2021

Solid State Bus Tie Switch for Shipboard Power Distribution Networks

Drazen Dujic, Gabriele Ulissi

Recent trends in shipboard power distribution network design, such as the transition from AC to DC result in new challenges on the issue of distribution network protection. Devices such as a solid state bus tie switch provide a first line of defence agains ...

2020

Protection Coordination for Reliable Marine DC Power Distribution Networks

Drazen Dujic, Seongil Kim, Gabriele Ulissi

This paper presents demonstration of a protection scheme integrated into marine DC power distribution networks to investigate the coordination between each protection action. The integrated protection scheme is based on three different time-frame protectio ...

2020

A Morphing Cargo Drone for Safe Flight in Proximity of Humans

Dario Floreano, Przemyslaw Mariusz Kornatowski, William John Stewart, Mir Alikhan Bin Mohammad Feroskhan

Delivery drones used by logistics companies today are equipped with unshielded propellers, which represent a major hurdle for in-hand parcel delivery. The exposed propeller blades are hazardous to unsuspecting bystanders, pets, and untrained users. One sol ...

2020

Tensile response of Strain-Hardening Ultra High Performance Fiber Reinforced Concretes under low loading rates and low temperatures

Mohamed Abdul Hafiz

Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) are cementitious materials with exceptional mechanical properties and outstanding durability making them ideal materials for rehabilitation, for the improvement of load carrying ...

EPFL2019

Automatic Couplings with Mechanical Overload Protection for Modular Robots

Jamie Paik, Christoph Heinrich Belke

This paper presents an automatic coupling mechanism with mechanical overload protection for use in modular robotic systems. The genderless coupling incorporates a novel safety mechanism that disengages two modules at a pre-defined torque threshold. Several ...

2019

Swiss Competence Center on Energy Research FURIES - Overview and Contributions in the Area of Power Electronics and Smart Grids

Mario Paolone, Drazen Dujic, Farhad Rachidi-Haeri, Milan Utvic, Reza Razzaghi, Stefan Milovanovic, Alexandre François Christe, Jin Wang, Mauro Carpita

This paper introduces a special session on results of the Swiss competence center on energy research FURIES that has been established in coordination with the Swiss Energy strategy 2050 with the specific aim to develop, promote and deploy power grid-relate ...

2019

A Modified Formula for Distance Relaying of Tapped Transmission Lines with Grounded Neutrals

Mario Paolone, Sadegh Azizi

Protection of tapped transmission lines with grounded neutrals has been always a challenging problem, usually resulting in compromise solutions. This type of lines may be protected by pilot relaying requiring dedicated and reliable telecommunication links. ...

2018

The key impact of incorporated Al2O3 barrier layer on W-based ReRAM switching performance

Elmira Shahrabi, Yusuf Leblebici, Jury Sandrini, Cecilia Giovinazzo

In this article, we inspected the bipolar resistive switching behavior of W-based ReRAMs, using HfO2 as switching layer. We have shown that the switching properties can be significantly enhanced by incorporating an Al2O3 layer as a barrier layer. It stabil ...

IEEE2018

Load Flow in Multiphase Distribution Networks: Existence, Uniqueness, Non-Singularity and Linear Models

Jean-Yves Le Boudec, Andrey Bernstein, Cong Wang

This paper considers unbalanced multiphase distribution systems with generic topology and different load models, and extends the Z-bus iterative load-flow algorithm based on a fixed-point interpretation of the AC load-flow equations. Explicit conditions fo ...

IEEE Institute of Electrical and Electronics Engineers2018

Fault Detection and Faulted Line Identification in Active Distribution Networks Using Synchrophasors-based Real-Time State Estimation

Mario Paolone, Paolo Romano, Marco Pignati, Lorenzo Zanni, Sidi-Rachid Cherkaoui

We intend to prove that PMU-based state estimation processes for active distribution networks exhibit unique time determinism and refresh rate that make them suitable to satisfy the time-critical requirements of protections as well as the accuracy requirem ...

Institute of Electrical and Electronics Engineers2017

Power-System State Estimation based on PMUs : Static and Dynamic Approaches - from Theory to Real Implementation

Lorenzo Zanni

An increasing number of phasor measurement units (PMUs) are being deployed in power systems in order to enhance the situational awareness and, in the near future, we expect that many networks will be extensively equipped with PMUs. These devices provide ac ...

EPFL2017

Fast Simulation of Electromagnetic Transients in Power Systems : Numerical Solvers and their Coupling with the Electromagnetic Time Reversal Process

Reza Razzaghi

The development of modern and future power systems is associated with the definition of new approaches for their simulation, control, and protection. To give an example, the increasing connection of massive renewable energy conversion systems is justifying ...

EPFL2016

High resolution eddy current inspection and eddy current testing for additive manufacturing

David Florian Hippert

Non-destructive testing (NDT) is one of the key method developed for the safety mechanism of many industrial fields, e.g. aerospace, oil and gas and power industries. Among the NDT techniques, eddy current testing belongs to the well-established ones and h ...

EPFL2016