Publications associées à Servomécanisme

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Closed-loop technique using gain balance for fast Brillouin Optical Time-Domain Analysis

Luc Thévenaz, Zhisheng Yang, Li Zhang, Ana Gabriela Correa Mena

A closed-loop servo control based on the gain ratio of two probing frequencies is proposed for fast BOTDA, where the feedback is independent of probe and pump loss, making it robust in harsh environment. ...

Optica Publishing Group2022

Closed-loop technique based on gain balancing for real-time Brillouin optical time-domain analysis

Luc Thévenaz, Zhisheng Yang, Li Zhang, Ana Gabriela Correa Mena

A closed-loop servo control based on balancing the gain of two probing frequencies is proposed for real-time Brillouin optical time-domain analysis (BOTDA) without post-processing. With the most basic BOTDA hardware setup, the system can perform measuremen ...

2022

Comparison of PI and Adaptive Fuzzy Controllers for Position Tracking of Servo System with Variable Loaded BLDC Motor

Hadi Ardiny

In recent years, several industries have widely applied BLDC servomotors for various purposes that they almost need a control system to be accurate and robust. In this paper, we compare an adaptive fuzzy controller and PI controller for BLDC servomotor pos ...

IEEE2022

Highly Stretchable Flame-Retardant Skin for Soft Robotics with Hydrogel-Montmorillonite-Based Translucent Matrix

Hritwick Banerjee

Flame-retardant coatings are crucial for intelligent systems operating in high-temperature (300-800 degrees C) scenarios, which typically involve multi-joint discrete or continuous kinematic systems. These multi-segment motion generation systems call for c ...

MARY ANN LIEBERT, INC2022

A unified framework for walking and running of bipedal robots

Ludovic Righetti, Elham Daneshmand

In this paper, we propose a novel framework capable of generating various walking and running gaits for bipedal robots. The main goal is to relax the fixed center of mass (CoM) height assumption of the linear inverted pendulum model (LIPM) and generate a w ...

IEEE2021

Self-Organized Laboratories for Smart Campus

Denis Gillet, Christophe Salzmann

A smart campus provides students who are geographically scattered with online tools to get access to learning resources and laboratories. Although these remote laboratories have the potential and capabilities to implement different learning experiments, mo ...

IEEE COMPUTER SOC2020

Bio-inspired design and validation of the Efficient Lockable Spring Ankle (ELSA) prosthesis

Mohamed Bouri, Renaud Ronsse, François André Heremans, Bruno Dehez

Over the last decade, active lower-limb prostheses demonstrated their ability to restore a physiological gait for transfemoral amputees by supplying the required positive energy balance during daily life locomotion activities. However, the added-value of s ...

IEEE2019

Design of a Highly Biomimetic and Fully-Actuated Robotic Finger

Daniel Thalmann

During design a mechanical structure such as a robotic finger, modeling parts and designing joints are two time-consuming steps. This paper presents a method for design and fabrication of a humanoid robotic finger that intends to mimic the human finger in ...

IEEE2019

Device having a plurality of latching micro-actuators and method of operating the same

Herbert Shea, Samuel Rosset, Nadine Besse, Juan José Zarate

An actuator device including a plurality of transducer actuators, and a common pneumatic actuation mechanism for shaping the plurality of transducer actuators, wherein each actuator of the plurality of transducer actuators includes a shape memory polymer m ...

2018

An integrator-differentiator TIA using a multi-element pseudo-resistor in its DC servo loop for enhanced noise performance

Georg Fantner, Jens Anders

In this paper, we present an integrator-differentiator transimpedance amplifier (TIA) featuring a multielement pseudo-resistor (MEPR) in the DC feedback path for improved noise performance in the presence of non-zero DC input currents. The presented protot ...

IEEE2018

Practical control methods for vacuum driven soft actuator modules

Jamie Paik, Matthew Aaron Robertson

Vacuum-powered Soft Pneumatic Actuator (VSPA) Modules have been described to afford advantages for rapid development of reconfigurable, multi-DoF soft pneumatic robots powered by vacuum by reducing their logistical complexity, however they also present new ...

2017

A Miniature Multimodal Actuator for Effective Tactile Feedback: Design and Characterization

Huaiqi Huang, Tao Li

We designed a miniature multimodal actuator by combining servomotors and vibrators. The actuator is mainly designed to non-invasively deliver tactile information to human skin by high-frequency vibration and low-frequency pressures simultaneously. By utili ...

Elsevier Science Bv2016

Autonomous Learning of Internal Dynamic Models for Reaching Tasks

Auke Ijspeert, Tadej Petric

The paper addresses the problem of learning internal task-specific dynamic models for a reaching task. Using task-specific dynamic models is crucial for achieving both high tracking accuracy and compliant behaviour, which improves safety concerns while wor ...

Springer-Verlag Berlin2016

Comparative Study of Haptic Interfaces for Bilateral Teleoperation of VTOL Aerial Robots

Felix Stephan Schill

Force feedback is a powerful sensory cue that can provide a user, remotely teleoperating a vertical takeoff and landing (VTOL) aerial robotic vehicle, with an enhanced perception of the robot motion and interaction with the local environment. The accepted ...

Ieee-Inst Electrical Electronics Engineers Inc2016

Manipulating flow separation: sensitivity of stagnation points, separatrix angles and recirculation area to steady actuation

François Gallaire, Edouard Boujo

A variational technique is used to derive analytical expressions for the sensitivity of several topological indicators of flow separation to steady actuation. Considering the boundary layer flow above a wall-mounted bump, the six following representative q ...

Royal Soc2014

Effect of Loading Rate on Fracture Behaviour of Rock Materials

Yang Zou, Qianbing Zhang

In this paper, experiments are carried out to study the quasi-static and dynamic fracture behaviour of sedimentary, igneous and metamorphic rocks. The notched semi-circular bending method has been employed to determine fracture parameters over a wide range ...

2014

Real-Time Automated Modeling and Control of Self-Assembling Systems

Alcherio Martinoli, Massimo Mastrangeli, Grégory Mermoud, Utkarsh Upadhyay

We present the M3 framework, a formal and generic computational framework for modeling and controlling distributed stochastic systems of purely reactive robots in an automated and real-time fashion. Based on the trajectories of the robots, the framework bu ...

Ieee2012

Augmented-SVM: Automatic space partitioning for combining multiple non-linear dynamics

Ashwini Shukla

Non-linear dynamical systems (DS) have been used extensively for building generative models of human behavior. Their applications range from modeling brain dynamics to encoding motor commands. Many schemes have been proposed for encoding robot motions usin ...

Curran Associates, Inc.2012

Fast polarizers installation for ECRH and ECE in TCV

Timothy Goodman, Federico Alberto Alfredo Felici, Laurie Porte

We report on the installation of fast polarizers for ECRH injection and ECE diagnostics, in the TCV tokamak. The main goal is to change the polarization during a plasma shot and react to changing conditions such as: plasma current and position, ECRH inject ...

2010