Publications associées à Lampe à arc

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

Comparison of JET-C DD neutron rates independently predicted by the ASCOT and TRANSP Monte Carlo heating codes

Henri Weisen

Simulations of the DD neutron rates predicted by the ASCOT and TRANSP Monte Carlo heating codes for a diverse set of JET-C (JET with carbon plasma facing components) plasmas are compared. A previous study (Weisen et al 2017 Nucl. Fusion 57 076029) of this ...

IOP Publishing Ltd2022

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

High-power gyrotrons for electron cyclotron heating and current drive

Minh Quang Tran

In many tokamak and stellarator experiments around the globe that arc investigating energy production via controlled thermonuclear fusion, electron cyclotron heating and current drive (ECH&CD) are used for plasma start-up, heating, non-inductive current dr ...

IOP Publishing Ltd2019

High-power modular LED-based illumination systems for mask-aligner lithography

Hans Peter Herzig, Johana Bernasconi, Toralf Scharf

Mask-aligner lithography is traditionally performed using mercury arc lamps with wavelengths ranging from 250 nm to 600 nm with intensity peaks at the i, g and h lines. Since mercury arc lamps present several disadvantages, it is of interest to replace the ...

2018

High power ultraviolet LED illumination systems: coherence properties and applications in photolithography

Johana Bernasconi

Mask-aligner photolithography is a technology used to replicate patterns from a mask to a photosensitive substrate. It is widely used in the fabrication of MEMS and micro-optical components, and for other applications with dimensions in the micrometer rang ...

EPFL2018

High power modular LED-based illumination system for lithography applications

Hans Peter Herzig, Marcel Groccia, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

Mask-aligner lithography is a technology used to transfer patterns with critical dimensions in the micrometer range from below 1 micron for contact printing to a dozen of microns in proximity printing. This technology is widely used in the fabrication of M ...

2018

Cell Shape Dynamics Reveal Balance of Elasticity and Contractility in Peripheral Arcs

Jean-Jacques Meister, Chiara Gabella, Alexander Verkhovskiy, Benoît Vianay, Céline Jeanne Labouesse

The mechanical interaction between adherent cells and their substrate relies on the formation of adhesion sites and on the stabilization of contractile acto-myosin bundles, or stress fibers. The shape of the cell and the orientation of these fibers can be ...

Cell Press2015

Coloring Intersection Graphs of Arc-Connected Sets in the Plane

Bartosz Maria Walczak, Michal Lason

A family of sets in the plane is simple if the intersection of any subfamily is arc-connected, and it is pierced by a line L if the intersection of any member with L is a nonempty segment. It is proved that the intersection graphs of simple families of com ...

Springer2014

LTCC integrated miniature Rb discharge lamp module for stable optical pumping in miniature atomic clocks and magnetometers

Herbert Shea, Peter Ryser, Thomas Maeder, Fabrizio Vecchio, Vinu Lalgudi Venkatraman

We report here on an integrated mini-lamp module (15x26x4 mm3) with a microfabricated rf-powered Rb dielectric barrier discharge (DBD) lamp (10x10x3 mm3) positioned on top of a 0.6 mm thick (thickness adjustable) 4-layer LTCC (Low Temperature Co-fired Cera ...

IEEE2012

Hiding patterns with daylight fluorescent inks

Roger Hersch, Romain Rossier

We propose a method for hiding patterns within printed images by making use of classical and of two daylight fluorescent magenta and yellow inks. Under the D65 illuminant we establish in the CIELAB space the gamut of a classical cmyk printer and the gamut ...

2011

On the Damper-Bar Current Calculation For High Power Salient Poles Synchronous Machines

Jean-Jacques Simond, Basile Kawkabani, György Atilla Bànyai

The goal of the paper was to analyze the current distribution of a high-power salient-pole synchronous machine damper winding. A few methods were considered but only two analytical methods are highlighted. Both methods arc based on parameter calculation by ...

2008

Catalytically grown carbon nanotubes: from synthesis to toxicity

László Forró, Arnaud Magrez, Jin Won Seo, Kyumin Lee, Mirko Milas

Catalytic chemical vapour deposition (CCVD) is currently the most promising technique to produce carbon nanotubes (CNTs) on a specific site as well as on a large-scale. Here, we review our recent experimental studies on CNTs grown by CCVD. The yield as wel ...

2007

Clinical evaluation of a method for detecting superficial transitional cell carcinoma of the bladder by light-induced fluorescence of protoporphyrin IX following topical application of 5-aminolevulinic acid: Preliminary results

Hubert van den Bergh, Georges Wagnières

BACKGROUND AND OBJECTIVE: In bladder cancer, conventional white light endoscopic examination of the bladder does not provide adequate information about the presence of "flat" urothelial lesions such as carcinoma in situ. In the present investigation, we ex ...

1997