Publications related to Interference lithography

Laser-Induced Forward Transfer of Functional Microdevices

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

Precise Capillary‐Assisted Nanoparticle Assembly in Reusable Templates

Jürgen Brugger, Olivier Martin, Giovanni Boero, Hsiang-Chu Wang, Ana Conde Rubio, Henry Shao-Chi Yu

Capillary-assisted particle assembly (CAPA) in predefined topographical templates is a scalable method for the precise positioning of nanoscale objects on various surfaces. High-resolution CAPA templates are typically fabricated by expensive electron-beam ...

2022

Controlling motion at the nanoscale with light

Mintae Chung

Optical manipulation at the micro- nano-scale is a fascinating topic due to its inherent non-invasive properties and multifaceted applications in various fields such as biology, sensing, micro-fluidics, and micro- nano-robotics. This thesis involves intens ...

EPFL2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Fabrication and applications of AuAg alloy metasurfaces and hybrid metal dielectric nanoantennas

Debdatta Ray

The most prevalent materials used in the field of plasmonics are Au and Ag. However, for the past few years, the plasmonic community has also been looking for alternative materials that have lower losses than Au and higher stability than Ag. This thesis is ...

EPFL2021

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

Olivier Martin, Christian Santschi, Banafsheh Abasahl

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resis ...

IOP PUBLISHING LTD2021

Development of microdevices for the in-plane thermoelectric characterization of deposited films

Stefano Mischler

Measuring the thermoelectric transport properties of a material is a prerequisite to determining its usefulness for application in waste heat recovery or cooling and the basis for devising improvement strategies. While well-established characterization met ...

ELSEVIER2021

Nanopillars Enabling III-V Integration on Si (100) and (111)

Lucas Güniat

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

EPFL2021

Template-assisted electrodeposition of nickel and nickel copper 3D microcomponents

Patrik Schürch

New types of metamaterials and architectured material require metallic materials with precise structural design in the microscale. However, additivemanufacturing of metallic structures in themicroscale has proven difficult, as the demand for the material q ...

EPFL2020

Diffractive optical elements in single crystal diamond

Niels Quack, Marcell Kristof Kiss

We demonstrate the design, fabrication, and experimental characterization of near-field binary phase transmission diffractive optical elements (DOEs) in single crystal diamond. Top-hat and arbitrary pattern DOE beam shapers were numerically optimized using ...

OPTICAL SOC AMER2020

Thermomechanical Nanocutting of 2D Materials

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio, Samuel Tobias Howell

Atomically thin materials, such as graphene and transition metal dichalcogenides, are promising candidates for future applications in micro/nanodevices and systems. For most applications, functional nanostructures have to be patterned by lithography. Devel ...

Wiley2020

Single crystal diamond gain mirrors for high performance vertical external cavity surface emitting lasers

Niels Quack, Grigore Suruceanu, Gergely Huszka, Alexandru Mereuta, Andrei Caliman, Pascal Gallo, Mehdi Naamoun

We report on the design, fabrication and optical performance of gain mirrors in single crystal diamond substrates for vertical external cavity surface emitting lasers (VECSELs). VECSELs have gained attention recently due to their potential for high emissio ...

2020

Frequency-scalable fabrication process flow for lithium niobate based Lamb wave resonators

Luis Guillermo Villanueva Torrijo, Muhammad Faizan

In this paper, we demonstrate the fabrication and characterization of lithium niobate (LN) based Lamb wave mode (S0 and SH0) resonators that address the stringent requirements of RF filtering for modern communication systems. The devices consist of a 400 n ...

IOP PUBLISHING LTD2020

Real- and Q-space travelling: multi-dimensional distribution maps of crystal-lattice strain (epsilon(044)) and tilt of suspended monolithic silicon nanowire structures

Yusuf Leblebici, Antonia Neels, Alex Dommann, Zuhal Tasdemir, Simone Dolabella

Silicon nanowire-based sensors find many applications in micro- and nano-electromechanical systems, thanks to their unique characteristics of flexibility and strength that emerge at the nanoscale. This work is the first study of this class of micro- and na ...

INT UNION CRYSTALLOGRAPHY2020

Electron Beam Induced Copper Deposition from Carboxylate Precursors and the Study of Underlying Growth Mechanisms

Luisa Berger

The fabrication of defined and high-quality metal nanostructures is an ongoing topic of research. Direct-write deposition of copper nanostructures is of great value for many fields of research and industrial applications. Focused electron beam induced depo ...

EPFL2020

Fabrication and Characterisation of Epitaxial PMN-PT Nano-structures

Xiao Di

Downscaling of the minimal feature size, or the gate length has been the key for the exponential im-provement of the performance of the logic CMOS integrated circuits over the last six decades. How-ever, since about 2003, some fundamental limits in the dev ...

EPFL2019

Printing sub-micron structures using Talbot mask-aligner lithography with a 193 nm CW laser light source

Toralf Scharf, Wilfried Noell, Raoul Kirner, Andreas Vetter

A continuous improvement of resolution in mask-aligner lithography is sought after to meet the requirements of an ever decreasing minimum feature size in back-end processes. For periodic structures, utilizing the Talbot effect for lithography has emerged a ...

2018

Micro-mechanics of 3D architectured metals synthesized by electrodeposition

Maxime Alain Baptiste Mieszala

Cellular metallic materials have emerged as a new promising class of materials due to their lightweight porous structures and advanced multi-functional properties. Originally limited to random metallic foams, modern lithography techniques have enabled the ...

EPFL2018

High power modular LED-based illumination system for lithography applications

Hans Peter Herzig, Marcel Groccia, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

Mask-aligner lithography is a technology used to transfer patterns with critical dimensions in the micrometer range from below 1 micron for contact printing to a dozen of microns in proximity printing. This technology is widely used in the fabrication of M ...

2018