Publications associées à Boiler (power generation)

Identification of typical district configurations: A two-step global sensitivity analysis framework

François Maréchal, Jonas Schnidrig, Cédric Terrier

The recent geopolitical conflicts in Europe have underscored the vulnerability of the current energy system to the volatility of energy carrier prices. In the prospect of defining robust energy systems ensuring sustainable energy supply in the future, the ...

Pergamon-Elsevier Science Ltd2024

Identification of typical district configurations: A two-step global sensitivity analysis framework

François Maréchal, Jonas Schnidrig, Cédric Terrier

The recent geopolitical conflicts in Europe highlighted the sensibility of the current energy system to the volatility of energy carrier prices. In the prospect of defining robust energy system configurations to ensure energy supply stability, it is necess ...

2023

Next generation cogeneration system for industry - Combined heat and fuel plant using biomass resources

François Maréchal, Adriano Viana Ensinas, Ayse Dilan Celebi

The requirement for sustainable development has prompted the researchers to explore solutions for better utilization of renewable energy resources in the future. Biomass is a promising resource and it can be converted to multiple products and services incl ...

Elsevier2019

Theoretical analysis of steam generation methods - Energy, CO 2 emission, and cost analysis

Jürg Alexander Schiffmann

A theoretical case study on steam generation has been performed. Different methods of producing steam by vapour compression, direct electrical heating, gas heating, heat pumping, use of waste heat, and a mixture thereof, were theoretically analysed. The fi ...

Elsevier2017

Optimal use of biomass in large-scale energy systems: insights for energy policy

François Maréchal, Stefano Moret, Emanuela Peduzzi, Victor Codina Gironès, Marco Nasato

Biomass chemical conversion processes allow the production of solid, liquid and gaseous biofuels, which can substitute almost any kind of fossil fuel and the associated greenhouse gas emissions. Despite this potential, high investment costs and conversion ...

2017

Methodology for the design and comparison of optimal production configurations of first and first and second generation ethanol with power

François Maréchal, Rami Bechara, Jean-Marc Schweitzer

This article applies a systematic methodology to the optimization and comparison of two sugarcane conversion processes of great potential: the production of first generation ethanol and electricity in an integrated distillery and cogeneration plant (1G+COG ...

2016

Optimal Operations and Resilient Investments in Steam Networks

François Maréchal, Greta Martha Van Eetvelde, Laurent Gabriel Félix Alexandre Stéphane Bungener

Steam is a key energy vector for industrial sites, most commonly used for process heating and cooling, cogeneration of heat and mechanical power as a motive fluid or for stripping. Steam networks are used to carry steam from producers to consumers and betw ...

2016

Optimal use of biomass in large-scale energy systems: insights for energy policy

François Maréchal, Stefano Moret, Emanuela Peduzzi, Victor Codina Gironès, Marco Nasato

Biomass chemical conversion processes allow the production of solid, liquid and gaseous biofuels, which can substitute almost any kind of fossil fuel and the associated greenhouse gas emissions. Despite this potential, high investment costs and conversion ...

University of Ljubljana2016

Environmental, Energetic and Economic Evaluation of Implementing a Supercritical Fluid-Based Nanocellulose Production Process in a Sugarcane Biorefinery

François Maréchal, Juliana Queiroz Albarelli

Nanocellulose, which is a disintegration product of plant cellulose, has recently come to public attention because of its great mechanical properties combined with renewability and biodegradability. From an environmental point-of-view, nanocellulose has sh ...

AIDIC Servizi S.r.l.2016

Optimisation of unit investment and load shedding in a steam network facing undercapacity

François Maréchal, Greta Martha Van Eetvelde, Laurent Gabriel Félix Alexandre Stéphane Bungener

Steam networks and their utilities should be dimensioned to satisfy day-to-day demand as well peaks. Peaks can be caused by unit start-ups, extreme weather conditions or combinations of high demand from process units. During maintenance operations or unexp ...

2015

On the physical mechanisms governing self-excited pressure surge in Francis turbines

François Avellan, Arthur Tristan Favrel, Christian Landry, Andres Müller, Keita Yamamoto

The required operating range for hydraulic machines is continually extended in an effort to integrate renewable energy sources with unsteady power outputs into the existing electrical grid. The off-design operation however brings forth unfavorable flow pat ...

IOP science2014

On the physical mechanisms governing self-excited pressure surge in Francis turbines

François Avellan, Arthur Tristan Favrel, Christian Landry, Andres Müller, Keita Yamamoto

The required operating range for hydraulic machines is continually extended in an effort to integrate renewable energy sources with unsteady power outputs into the existing electrical grid. The off-design operation however brings forth unfavorable flow pat ...

IOP Publishing Ltd2014

Procédé et dispositif de fabrication de briquettes

Process for producing a briquette containing carbon carriers (2): mixing the carbon carriers (2) together with a binder system (3) with introduction of steam and the mixture obtained is pressed to form briquettes. At least one of drying carbon carriers (2) ...

2013

Critical Heat Flux of R134a and R245fa Inside Small-Diameter Tubes

John Richard Thome, Sylwia Szczukiewicz, Cristiano Bigonha Tibiriça

This article presents new experimental critical heat flux results under saturated flow boiling conditions for a macro/microscale tube. The data were obtained in a horizontal 2.20-mm inside diameter stainless-steel tube with heating lengths of 361 and 154 m ...

Taylor & Francis2013

Robust and Gain-Scheduled PID Controller Design for Condensing Boilers by Linear Programming

Alireza Karimi, Vinicius De Oliveira

This paper addresses the water temperature control in condensing domestic boilers. The main challenge of this process under the controller design perspective is the fact that the dynamics of condensing boilers are strongly affected by the demanded water fl ...

2012

Performance and Profitability Perspectives of a CO2 based District Energy Network in Geneva’s City Center

Daniel Favrat, Céline Weber, Samuel Henchoz

A new type of district energy network capable of providing simultaneously heating and cooling is being investigated. It is based on the use of CO2 as a heat transfer fluid by taking advantage of the latent heat of vaporization, to store and transfer heat a ...

2012

Tubulo II: magnetic climbing inchworm for inspection of boiler tubes

Francesco Mondada, Hannes Bleuler, Frédéric Rochat, Patrick Schoeneich, Olivier Truong-Dat Nguyen

TUBULO II is a climbing inspection robot with for inner inspection of boiler tubes. Its locomotion principle is the inchworm type. The adhesion is realized with Magnetic Switchable Device [1]. The inner is able to operate within a tube of inner bore diamet ...

World Scientific2011

Boiling on a Tube Bundle : Heat Transfer, Pressure Drop and Flow Patterns

Eugene van Rooyen

The complexity of two-phase flow boiling on a tube bundle presents many challenges to the understanding of the physical phenomena taking place. It is important to quantify these numerous heat flow mechanisms in order to better describe the performance of t ...

EPFL2011

Tubulo - a train-like miniature inspection climbing robot for ferromagnetic tubes

Francesco Mondada, Hannes Bleuler, Roland Moser, Gilles Caprari, Frédéric Rochat, Patrick Schoeneich, Olivier Truong-Dat Nguyen

A train-like miniature climbing inspection robot for ferromagnetic tubes is presented in this paper. Using magnetic wheels, it climbs in tubes of 25 mm of diameter and bigger in any orientation, and pass bends with curvatures above 150 mm in some cases. It ...

IEEE Press2010

Highly Compact Robots for Inspection of Power Plants

Francesco Mondada, Roland Siegwart, Roland Moser, Fabien Tâche, Frédéric Rochat, Gilles Caprari, Patrick Schoeneich, Andreas Breitenmoser

This paper reports on a 3 years applied research project dealing with several inspection scenarios of power plants and resulting in many robot prototypes and 3 main achievements. The project is a common effort between industry and university, including ALS ...

IEEE Press2010